All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Arve Knudsen" <aknuds-1@broadpark.no>
To: Jaroslav Kysela <perex@suse.cz>
Cc: "alsa-devel@lists.sourceforge.net" <alsa-devel@lists.sourceforge.net>
Subject: Re: Problem writing to PCM plugin
Date: Wed, 11 Aug 2004 15:53:46 +0200	[thread overview]
Message-ID: <opsckl7wiwfmr65f@mail.broadpark.no> (raw)
In-Reply-To: <Pine.LNX.4.58.0408111536030.1788@pnote.perex-int.cz>

The plugin:
pcm.9636SPDIF {
     type plug
     slave.pcm "hw:1"
     ttable.0.16 1
     ttable.1.17 1
}

The dump:
Plug PCM: Linear Integer <-> Linear Float conversion PCM (S32_LE)
Its setup is:
stream       : PLAYBACK
access       : MMAP_INTERLEAVED
format       : FLOAT_LE
subformat    : STD
channels     : 2
rate         : 44100
exact rate   : 44100 (44100/1)
msbits       : 32
buffer_size  : 2048
period_size  : 1024
period_time  : 23219
tick_time    : 1000
tstamp_mode  : MMAP
period_step  : 1
sleep_min    : 0
avail_min    : 1024
xfer_align   : 1
start_threshold  : 1024
stop_threshold   : 2048
silence_threshold: 0
silence_size : 2147483647
boundary     : 1073741824
Slave: Route conversion PCM (sformat=S32_LE)
Transformation table:
0 <- none
1 <- none
Its setup is:
stream       : PLAYBACK
access       : MMAP_INTERLEAVED
format       : S32_LE
subformat    : STD
channels     : 2
rate         : 44100
exact rate   : 44100 (44100/1)
msbits       : 32
buffer_size  : 2048
period_size  : 1024
period_time  : 23219
tick_time    : 1000
tstamp_mode  : MMAP
period_step  : 1
sleep_min    : 0
avail_min    : 1024
xfer_align   : 1
start_threshold  : 1024
stop_threshold   : 2048
silence_threshold: 0
silence_size : 2147483647
boundary     : 1073741824
Slave: Route conversion PCM (sformat=S32_LE)
Transformation table:
0 <- none
1 <- none
2 <- none
3 <- none
4 <- none
5 <- none
6 <- none
7 <- none
8 <- none
9 <- none
10 <- none
11 <- none
12 <- none
13 <- none
14 <- none
15 <- none
16 <- 0
17 <- 1
Its setup is:
stream       : PLAYBACK
access       : MMAP_INTERLEAVED
format       : S32_LE
subformat    : STD
channels     : 2
rate         : 44100
exact rate   : 44100 (44100/1)
msbits       : 32
buffer_size  : 2048
period_size  : 1024
period_time  : 23219
tick_time    : 1000
tstamp_mode  : MMAP
period_step  : 1
sleep_min    : 0
avail_min    : 1024
xfer_align   : 1
start_threshold  : 1024
stop_threshold   : 2048
silence_threshold: 0
silence_size : 2147483647
boundary     : 1073741824
Slave: Hardware PCM card 1 'RME Digi9636 (Rev 1.5)' device 0 subdevice 0

Its setup is:
stream       : PLAYBACK
access       : MMAP_NONINTERLEAVED
format       : S32_LE
subformat    : STD
channels     : 18
rate         : 44100
exact rate   : 44100 (44100/1)
msbits       : 24
buffer_size  : 2048
period_size  : 1024
period_time  : 23219
tick_time    : 1000
tstamp_mode  : MMAP
period_step  : 1
sleep_min    : 0
avail_min    : 1024
xfer_align   : 1
start_threshold  : 1024
stop_threshold   : 2048
silence_threshold: 0
silence_size : 2147483647
boundary     : 1073741824

On Wed, 11 Aug 2004 15:36:24 +0200 (CEST), Jaroslav Kysela <perex@suse.cz>  
wrote:

> On Wed, 11 Aug 2004, Arve Knudsen wrote:
>
>> point format in the PortAudio tests, so there is an intermediate
>> conversion before the audio gets to the routing plugin. Could this be  
>> the
>> cause of the problem? If you wish I can provide output from  
>> snd_pcm_dump.
>
> Yes, send the dump, please.
>
> 						Jaroslav
>
> -----
> Jaroslav Kysela <perex@suse.cz>
> Linux Kernel Sound Maintainer
> ALSA Project, SUSE Labs




-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285

  reply	other threads:[~2004-08-11 13:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-08-11 13:33 Problem writing to PCM plugin Arve Knudsen
2004-08-11 13:36 ` Jaroslav Kysela
2004-08-11 13:53   ` Arve Knudsen [this message]
2004-08-11 13:45 ` Clemens Ladisch
2004-08-11 14:00   ` Arve Knudsen
2004-08-11 15:06   ` Arve Knudsen
2004-08-11 15:03     ` Jaroslav Kysela

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=opsckl7wiwfmr65f@mail.broadpark.no \
    --to=aknuds-1@broadpark.no \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=perex@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.