From: Platform Team regression test user <citrix-osstest@xenproject.org>
To: xen-devel@lists.xensource.com, osstest-admin@xenproject.org
Subject: [xen-4.5-testing baseline-only test] 38223: tolerable FAIL
Date: Fri, 30 Oct 2015 01:38:06 +0000 [thread overview]
Message-ID: <osstest-38223-mainreport@xen.org> (raw)
This run is configured for baseline tests only.
flight 38223 xen-4.5-testing real [real]
http://osstest.xs.citrite.net/~osstest/testlogs/logs/38223/
Failures :-/ but no regressions.
Regressions which are regarded as allowable (not blocking):
test-amd64-amd64-xl-credit2 21 guest-start/debian.repeat fail like 38192
test-amd64-amd64-xl-rtds 6 xen-boot fail like 38192
test-amd64-amd64-pygrub 20 guest-start/debian.repeat fail like 38192
Tests which did not succeed, but are not blocking:
test-armhf-armhf-xl-vhd 9 debian-di-install fail never pass
test-armhf-armhf-libvirt-raw 9 debian-di-install fail never pass
test-armhf-armhf-libvirt-qcow2 9 debian-di-install fail never pass
test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass
test-amd64-amd64-rumpuserxen-amd64 15 rumpuserxen-demo-xenstorels/xenstorels.repeat fail never pass
test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass
test-armhf-armhf-libvirt 14 guest-saverestore fail never pass
test-armhf-armhf-libvirt 12 migrate-support-check fail never pass
test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass
test-armhf-armhf-xl-credit2 13 saverestore-support-check fail never pass
test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass
test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass
test-armhf-armhf-xl-midway 12 migrate-support-check fail never pass
test-armhf-armhf-xl-midway 13 saverestore-support-check fail never pass
test-amd64-i386-libvirt 12 migrate-support-check fail never pass
test-amd64-amd64-libvirt 12 migrate-support-check fail never pass
test-armhf-armhf-xl 13 saverestore-support-check fail never pass
test-armhf-armhf-xl 12 migrate-support-check fail never pass
test-armhf-armhf-xl-rtds 13 saverestore-support-check fail never pass
test-armhf-armhf-xl-rtds 12 migrate-support-check fail never pass
test-amd64-amd64-xl-qemuu-win7-amd64 17 guest-stop fail never pass
test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass
test-amd64-amd64-xl-qemut-win7-amd64 17 guest-stop fail never pass
test-amd64-i386-xl-qemuu-win7-amd64 17 guest-stop fail never pass
test-amd64-i386-xl-qemut-win7-amd64 17 guest-stop fail never pass
version targeted for testing:
xen 47db4b088d18d900b5613ecb872283804320dde9
baseline version:
xen 80e9f5624f9d1ef2e7bbd9b9b185e96b45e1bb17
Last test of basis 38192 2015-10-21 15:18:05 Z 8 days
Testing same since 38223 2015-10-29 12:55:02 Z 0 days 1 attempts
------------------------------------------------------------
People who touched revisions under test:
Ian Campbell <ian.campbell@citrix.com>
Ian Jackson <ian.jackson@eu.citrix.com>
Jan Beulich <jbeulich@suse.com>
Julien Grall <julien.grall@citrix.com>
Wei Liu <wei.liu2@citrix.com>
Yang Zhang <yang.z.zhang@intel.com>
jobs:
build-amd64 pass
build-armhf pass
build-i386 pass
build-amd64-libvirt pass
build-armhf-libvirt pass
build-i386-libvirt pass
build-amd64-prev pass
build-i386-prev pass
build-amd64-pvops pass
build-armhf-pvops pass
build-i386-pvops pass
build-amd64-rumpuserxen pass
build-i386-rumpuserxen pass
test-amd64-amd64-xl pass
test-armhf-armhf-xl pass
test-amd64-i386-xl pass
test-amd64-amd64-xl-pvh-amd fail
test-amd64-i386-qemut-rhel6hvm-amd pass
test-amd64-i386-qemuu-rhel6hvm-amd pass
test-amd64-amd64-xl-qemut-debianhvm-amd64 pass
test-amd64-i386-xl-qemut-debianhvm-amd64 pass
test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass
test-amd64-i386-xl-qemuu-debianhvm-amd64 pass
test-amd64-i386-freebsd10-amd64 pass
test-amd64-amd64-xl-qemuu-ovmf-amd64 pass
test-amd64-i386-xl-qemuu-ovmf-amd64 pass
test-amd64-amd64-rumpuserxen-amd64 fail
test-amd64-amd64-xl-qemut-win7-amd64 fail
test-amd64-i386-xl-qemut-win7-amd64 fail
test-amd64-amd64-xl-qemuu-win7-amd64 fail
test-amd64-i386-xl-qemuu-win7-amd64 fail
test-amd64-amd64-xl-credit2 fail
test-armhf-armhf-xl-credit2 pass
test-amd64-i386-freebsd10-i386 pass
test-amd64-i386-rumpuserxen-i386 pass
test-amd64-amd64-xl-pvh-intel fail
test-amd64-i386-qemut-rhel6hvm-intel pass
test-amd64-i386-qemuu-rhel6hvm-intel pass
test-amd64-amd64-libvirt pass
test-armhf-armhf-libvirt fail
test-amd64-i386-libvirt pass
test-armhf-armhf-xl-midway pass
test-amd64-amd64-migrupgrade pass
test-amd64-i386-migrupgrade pass
test-amd64-amd64-xl-multivcpu pass
test-armhf-armhf-xl-multivcpu pass
test-amd64-amd64-pair pass
test-amd64-i386-pair pass
test-amd64-amd64-libvirt-pair pass
test-amd64-i386-libvirt-pair pass
test-amd64-amd64-amd64-pvgrub pass
test-amd64-amd64-i386-pvgrub pass
test-amd64-amd64-pygrub fail
test-armhf-armhf-libvirt-qcow2 fail
test-amd64-amd64-xl-qcow2 pass
test-armhf-armhf-libvirt-raw fail
test-amd64-i386-xl-raw pass
test-amd64-amd64-xl-rtds fail
test-armhf-armhf-xl-rtds pass
test-amd64-i386-xl-qemut-winxpsp3-vcpus1 pass
test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass
test-amd64-amd64-libvirt-vhd pass
test-armhf-armhf-xl-vhd fail
test-amd64-amd64-xl-qemut-winxpsp3 pass
test-amd64-i386-xl-qemut-winxpsp3 pass
test-amd64-amd64-xl-qemuu-winxpsp3 pass
test-amd64-i386-xl-qemuu-winxpsp3 pass
------------------------------------------------------------
sg-report-flight on osstest.xs.citrite.net
logs: /home/osstest/logs
images: /home/osstest/images
Logs, config files, etc. are available at
http://osstest.xs.citrite.net/~osstest/testlogs/logs
Test harness code can be found at
http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary
Push not applicable.
------------------------------------------------------------
commit 47db4b088d18d900b5613ecb872283804320dde9
Author: Ian Jackson <ian.jackson@eu.citrix.com>
Date: Mon Oct 26 11:16:06 2015 +0000
Revert "libxl: use correct command line for arm guests."
This reverts commit 9befcd335c21818caaf5c5ab764d31a4006d2800.
This commit breaks the build:
libxl_arm.c: In function 'libxl__arch_domain_init_hw_description':
libxl_arm.c:591:76: error: 'state' undeclared (first use in this function)
libxl_arm.c:591:76: note: each undeclared identifier is reported only once fo\
r each function it appears in
make[3]: *** [libxl_arm.o] Error 1
"state" was introduced in a7511905 "xen: Extend DOMCTL createdomain to
support arch configuration".
On Julien's recommendation: a7511905 ought not to be backported, so
revert this and wait for Ian Campbell to get back.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Julien Grall <julien.grall@citrix.com>
CC: Ian Campbell <Ian.Campbell@eu.citrix.com>
CC: Jan Beulich <JBeulich@suse.com>
commit a5d0480d9c5b36b5f47459ce92ed3c67b7bed51d
Author: Julien Grall <julien.grall@citrix.com>
Date: Thu Sep 17 18:36:36 2015 +0100
tools/libxc: arm: Check the index before accessing the bank
When creating a guest with more than 3GB of memory, the 2 banks will be
used and the loop with overrunning. The code will fail later on because
Xen will deny to populate the region:
domainbuilder: detail: xc_dom_devicetree_mem: called
domainbuilder: detail: xc_dom_mem_init: mem 3096 MB, pages 0xc1800 pages, 4k each
domainbuilder: detail: xc_dom_mem_init: 0xc1800 pages
domainbuilder: detail: xc_dom_boot_mem_init: called
domainbuilder: detail: set_mode: guest xen-3.0-aarch64, address size 64
domainbuilder: detail: xc_dom_malloc : 14384 kB
domainbuilder: detail: populate_guest_memory: populating RAM @0000000040000000-0000000100000000 (3072MB)
domainbuilder: detail: populate_one_size: populated 0x3/0x3 entries with shift 18
domainbuilder: detail: populate_guest_memory: populating RAM @0000000200000000-0000000201800000 (24MB)
domainbuilder: detail: populate_one_size: populated 0xc/0xc entries with shift 9
domainbuilder: detail: populate_guest_memory: populating RAM @0000007fad41c000-0007fb39dd42c000 (2141954816MB)
domainbuilder: detail: populate_one_size: populated 0x100/0x1e4 entries with shift 0
domainbuilder: detail: populate_guest_memory: Not enough RAM
This is because we are currently accessing the bank before checking the
validity of the index. AFAICT, on Debian Jessie, the compiler (gcc 4.9.2) is
assuming that it's not necessary to verify the index because it's used
before. This is a valid assumption because the operand of && are
execute from from left to right.
Re-order the checks to verify the validity of the index before accessing
the bank.
The problem has been present since the introduction of the multi-bank
feature in commit 45d9867837f099e9eed4189dac5ed39d1fe2ed49 " tools: arm:
prepare domain builder for multiple banks of guest RAM".
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit ed5c2c05cfa557b2391aef9557864d8d958d8d84)
commit 9befcd335c21818caaf5c5ab764d31a4006d2800
Author: Ian Campbell <ian.campbell@citrix.com>
Date: Thu Aug 6 11:55:57 2015 +0100
libxl: use correct command line for arm guests.
We need to use libxl__domain_build_state.pv_cmdline in order to pickup
the correct args when using pygrub. libxl_domain_build_info.cmdline is
any args statically configured by the user.
This is consistent with the call to xc_domain_allocate, which takes
the cmdline too (in that case for x86/PV usage).
state->pv_cmdline is also set for non-pygrub guests, since
libxl__bootloader_run propagates info->cmdline if no bootloader is
configured.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 201eac83831d94ba2e9a63a7eed4c128633fafb1)
commit 53c11b041793944e26165f294fb96242c459d197
Author: Jan Beulich <jbeulich@suse.com>
Date: Wed Oct 21 17:33:32 2015 +0200
x86/NUMA: fix SRAT table processor entry parsing and consumption
- don't overrun apicid_to_node[] (possible in the x2APIC case)
- don't limit number of processor related SRAT entries we can consume
- make acpi_numa_{processor,x2apic}_affinity_init() as similar to one
another as possible
- print APIC IDs in hex (to ease matching with other log messages), at
once making legacy and x2APIC ones distinguishable (by width)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 83281fc9b31396e94c0bfb6550b75c165037a0ad
master date: 2015-10-14 12:46:27 +0200
commit 0368463ece89a400c2f63800b782929d4b5fb949
Author: Jan Beulich <jbeulich@suse.com>
Date: Wed Oct 21 17:31:02 2015 +0200
x86: hide MWAITX from PV domains
Since MWAIT is hidden too. (Linux starting with 4.3 is making use of
that feature, and is checking for it without looking at the MWAIT one.)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 941cd44324db7eddc46cba4596fa13d505066ccf
master date: 2015-10-13 17:17:52 +0200
commit a262a89198551d5b74477b21cdc733ce414c1ff0
Author: Jan Beulich <jbeulich@suse.com>
Date: Wed Oct 21 17:30:12 2015 +0200
VT-d: don't suppress invalidation address write when it is zero
GFN zero is a valid address, and hence may need invalidation done for
it just like for any other GFN.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Yang Zhang <yang.z.zhang@intel.com>
master commit: 710942e57fb42ff8f344ca82f6b678f67e38ae63
master date: 2015-10-12 15:58:35 +0200
(qemu changes not included)
reply other threads:[~2015-10-30 1:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=osstest-38223-mainreport@xen.org \
--to=citrix-osstest@xenproject.org \
--cc=osstest-admin@xenproject.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.