From: osstest service owner <osstest-admin@xenproject.org>
To: xen-devel@lists.xensource.com, osstest-admin@xenproject.org
Subject: [xen-unstable test] 78811: trouble: broken/fail/pass
Date: Sat, 23 Jan 2016 17:18:39 +0000 [thread overview]
Message-ID: <osstest-78811-mainreport@xen.org> (raw)
flight 78811 xen-unstable real [real]
http://logs.test-lab.xenproject.org/osstest/logs/78811/
Failures and problems with tests :-(
Tests which did not succeed and are blocking,
including tests which could not be run:
test-amd64-i386-xl-qemuu-ovmf-amd64 3 host-install(3) broken REGR. vs. 78610
test-amd64-i386-qemut-rhel6hvm-amd 3 host-install(3) broken REGR. vs. 78610
test-amd64-i386-xl-qemut-winxpsp3 3 host-install(3) broken REGR. vs. 78610
Regressions which are regarded as allowable (not blocking):
test-armhf-armhf-xl-rtds 11 guest-start fail REGR. vs. 78610
test-amd64-i386-rumpuserxen-i386 10 guest-start fail like 78610
test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm 9 debian-hvm-install fail like 78610
test-amd64-amd64-xl-qemut-win7-amd64 16 guest-stop fail like 78610
test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail like 78610
Tests which did not succeed, but are not blocking:
test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass
test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass
test-armhf-armhf-libvirt 14 guest-saverestore fail never pass
test-armhf-armhf-libvirt 12 migrate-support-check fail never pass
test-amd64-amd64-libvirt-xsm 12 migrate-support-check fail never pass
test-amd64-i386-libvirt-xsm 12 migrate-support-check fail never pass
test-amd64-amd64-libvirt 12 migrate-support-check fail never pass
test-amd64-amd64-qemuu-nested-amd 16 debian-hvm-install/l1/l2 fail never pass
test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-stop fail never pass
test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass
test-amd64-i386-libvirt 12 migrate-support-check fail never pass
test-armhf-armhf-xl-credit2 13 saverestore-support-check fail never pass
test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass
test-armhf-armhf-xl-cubietruck 12 migrate-support-check fail never pass
test-armhf-armhf-xl-cubietruck 13 saverestore-support-check fail never pass
test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass
test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass
test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass
test-armhf-armhf-xl 12 migrate-support-check fail never pass
test-armhf-armhf-xl 13 saverestore-support-check fail never pass
test-armhf-armhf-libvirt-xsm 12 migrate-support-check fail never pass
test-armhf-armhf-libvirt-xsm 14 guest-saverestore fail never pass
test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass
test-armhf-armhf-libvirt-qcow2 11 migrate-support-check fail never pass
test-armhf-armhf-libvirt-qcow2 13 guest-saverestore fail never pass
test-armhf-armhf-libvirt-raw 13 guest-saverestore fail never pass
test-armhf-armhf-libvirt-raw 11 migrate-support-check fail never pass
test-armhf-armhf-xl-arndale 12 migrate-support-check fail never pass
test-armhf-armhf-xl-arndale 13 saverestore-support-check fail never pass
test-armhf-armhf-xl-xsm 13 saverestore-support-check fail never pass
test-armhf-armhf-xl-xsm 12 migrate-support-check fail never pass
test-armhf-armhf-xl-vhd 11 migrate-support-check fail never pass
test-armhf-armhf-xl-vhd 12 saverestore-support-check fail never pass
test-amd64-i386-xl-qemut-win7-amd64 16 guest-stop fail never pass
version targeted for testing:
xen 3272230848f36eb5bbb660216898a90048a81d9f
baseline version:
xen 1949868d640427dc91bfb23741d78eb1d86841c8
Last test of basis 78610 2016-01-20 10:56:23 Z 3 days
Failing since 78703 2016-01-21 17:20:38 Z 1 days 2 attempts
Testing same since 78811 2016-01-22 14:50:35 Z 1 days 1 attempts
------------------------------------------------------------
People who touched revisions under test:
Dario Faggioli <dario.faggioli@citrix.com>
George Dunlap <george.dunlap@citrix.com>
Ian Campbell <ian.campbell@citrix.com>
Jan Beulich <jbeulich@suse.com>
Jonathan Creekmore <jonathan.creekmore@gmail.com>
Tim Deegan <tim@xen.org>
Wen Congyang <wency@cn.fujitsu.com>
jobs:
build-amd64-xsm pass
build-armhf-xsm pass
build-i386-xsm pass
build-amd64 pass
build-armhf pass
build-i386 pass
build-amd64-libvirt pass
build-armhf-libvirt pass
build-i386-libvirt pass
build-amd64-oldkern pass
build-i386-oldkern pass
build-amd64-prev pass
build-i386-prev pass
build-amd64-pvops pass
build-armhf-pvops pass
build-i386-pvops pass
build-amd64-rumpuserxen pass
build-i386-rumpuserxen pass
test-amd64-amd64-xl pass
test-armhf-armhf-xl pass
test-amd64-i386-xl pass
test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm pass
test-amd64-i386-xl-qemut-debianhvm-amd64-xsm pass
test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass
test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass
test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass
test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass
test-amd64-amd64-xl-qemut-stubdom-debianhvm-amd64-xsm pass
test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm fail
test-amd64-amd64-libvirt-xsm pass
test-armhf-armhf-libvirt-xsm fail
test-amd64-i386-libvirt-xsm pass
test-amd64-amd64-xl-xsm pass
test-armhf-armhf-xl-xsm pass
test-amd64-i386-xl-xsm pass
test-amd64-amd64-qemuu-nested-amd fail
test-amd64-amd64-xl-pvh-amd fail
test-amd64-i386-qemut-rhel6hvm-amd broken
test-amd64-i386-qemuu-rhel6hvm-amd pass
test-amd64-amd64-xl-qemut-debianhvm-amd64 pass
test-amd64-i386-xl-qemut-debianhvm-amd64 pass
test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass
test-amd64-i386-xl-qemuu-debianhvm-amd64 pass
test-amd64-i386-freebsd10-amd64 pass
test-amd64-amd64-xl-qemuu-ovmf-amd64 pass
test-amd64-i386-xl-qemuu-ovmf-amd64 broken
test-amd64-amd64-rumpuserxen-amd64 pass
test-amd64-amd64-xl-qemut-win7-amd64 fail
test-amd64-i386-xl-qemut-win7-amd64 fail
test-amd64-amd64-xl-qemuu-win7-amd64 fail
test-amd64-i386-xl-qemuu-win7-amd64 fail
test-armhf-armhf-xl-arndale pass
test-amd64-amd64-xl-credit2 pass
test-armhf-armhf-xl-credit2 pass
test-armhf-armhf-xl-cubietruck pass
test-amd64-i386-freebsd10-i386 pass
test-amd64-i386-rumpuserxen-i386 fail
test-amd64-amd64-qemuu-nested-intel pass
test-amd64-amd64-xl-pvh-intel fail
test-amd64-i386-qemut-rhel6hvm-intel pass
test-amd64-i386-qemuu-rhel6hvm-intel pass
test-amd64-amd64-libvirt pass
test-armhf-armhf-libvirt fail
test-amd64-i386-libvirt pass
test-amd64-amd64-migrupgrade pass
test-amd64-i386-migrupgrade pass
test-amd64-amd64-xl-multivcpu pass
test-armhf-armhf-xl-multivcpu pass
test-amd64-amd64-pair pass
test-amd64-i386-pair pass
test-amd64-amd64-libvirt-pair pass
test-amd64-i386-libvirt-pair pass
test-amd64-amd64-amd64-pvgrub pass
test-amd64-amd64-i386-pvgrub pass
test-amd64-amd64-pygrub pass
test-armhf-armhf-libvirt-qcow2 fail
test-amd64-amd64-xl-qcow2 pass
test-armhf-armhf-libvirt-raw fail
test-amd64-i386-xl-raw pass
test-amd64-amd64-xl-rtds pass
test-armhf-armhf-xl-rtds fail
test-amd64-i386-xl-qemut-winxpsp3-vcpus1 pass
test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass
test-amd64-amd64-libvirt-vhd pass
test-armhf-armhf-xl-vhd pass
test-amd64-amd64-xl-qemut-winxpsp3 pass
test-amd64-i386-xl-qemut-winxpsp3 broken
test-amd64-amd64-xl-qemuu-winxpsp3 pass
test-amd64-i386-xl-qemuu-winxpsp3 pass
------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images
Logs, config files, etc. are available at
http://logs.test-lab.xenproject.org/osstest/logs
Explanation of these reports, and of osstest in general, is at
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master
Test harness code can be found at
http://xenbits.xen.org/gitweb?p=osstest.git;a=summary
broken-step test-amd64-i386-xl-qemuu-ovmf-amd64 host-install(3)
broken-step test-amd64-i386-qemut-rhel6hvm-amd host-install(3)
broken-step test-amd64-i386-xl-qemut-winxpsp3 host-install(3)
Not pushing.
------------------------------------------------------------
commit 3272230848f36eb5bbb660216898a90048a81d9f
Author: Jan Beulich <jbeulich@suse.com>
Date: Thu Jan 21 16:11:04 2016 +0100
x86: fix (and simplify) MTRR overlap checking
Obtaining one individual range per variable range register (via
get_mtrr_range()) was bogus from the beginning, as these registers may
cover multiple disjoint ranges. Do away with that, in favor of simply
comparing masked addresses.
Also, for is_var_mtrr_overlapped()'s result to be correct when called
from mtrr_wrmsr(), generic_set_mtrr() must update saved state first.
As minor cleanup changes, constify is_var_mtrr_overlapped()'s parameter
and make mtrr_wrmsr() static.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
commit 53de839fb40936c074213a0c400e3c959e4ec461
Author: Jan Beulich <jbeulich@suse.com>
Date: Thu Jan 21 16:10:42 2016 +0100
x86: constrain MFN range Dom0 may access
... to that covered by the physical address width supported by the
processor. This implicitly avoids Dom0 (accidentally or due to some
kind of abuse) passing out of range addresses to a guest, which in
turn eliminates this only possibility for PV guests to create PTEs
with one or more reserved bits set.
Note that this is not a security issue due to XSA-77.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
commit 344e852bf0866dfa9886c8328b23a2563aca8a32
Author: Jan Beulich <jbeulich@suse.com>
Date: Thu Jan 21 16:10:19 2016 +0100
x86/paging: invlpg() hook returns boolean
... so make its return type reflect this.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: George Dunlap <george.dunlap@citrix.com>
commit f289b9a4a7b2337288253671a12b9519fd275b8d
Author: Jan Beulich <jbeulich@suse.com>
Date: Thu Jan 21 16:09:58 2016 +0100
x86/PV: relax LDT address check
There's no point placing restrictions on its address when the LDT size
is zero.
Also convert a local variable to a slightly more efficient type.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
commit 828e114f7cdd9910483783ab0563b178325e579a
Author: Jan Beulich <jbeulich@suse.com>
Date: Thu Jan 21 16:09:22 2016 +0100
x86/mmuext: tighten TLB flush address checks
Addresses passed by PV guests should be subjected to __addr_ok(),
avoiding undue TLB flushes.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
commit 666aca08175bfee69aee6bc9542bb0c51fa6a8ae
Author: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Date: Thu Jan 21 16:07:02 2016 +0100
sched: use the auto-generated list of schedulers
Instead of having a manually-curated list of schedulers, use the array
that was auto-generated simply by compiling in the scheduler files as
the sole source of truth of the available schedulers.
Signed-off-by: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Acked-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
commit 18c8d613aa8d8d6dc0da1a70d55249ddd78e28f4
Author: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Date: Thu Jan 21 16:06:36 2016 +0100
sched: register the schedulers into the list
Adds a simple macro to place a pointer to a scheduler into an array
section at compile time. Also, goes ahead and generates the array
entries with each of the schedulers.
Signed-off-by: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Acked-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 2c94cd917de72d4ea82ea40b95b1b8ccc8557282
Author: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Date: Thu Jan 21 16:06:10 2016 +0100
build: alloc space for sched list in the link file
Creates a section to contain scheduler entry pointers that are gathered
together into an array. This will allow, in a follow-on patch, scheduler
entries to be automatically gathered together into the array for
automatic parsing.
Signed-off-by: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit f3187f83d3e74fa5cfa40f790f08d564c219e124
Author: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Date: Thu Jan 21 16:05:35 2016 +0100
build: hook the schedulers into Kconfig
Allow the schedulers to be independently enabled or disabled at
compile-time. To match existing behavior, all four schedulers are
compiled in by default, although the Credit2, RTDS, and ARINC653 are
marked EXPERIMENTAL to match their not currently supported status.
Signed-off-by: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Dario Faggioli <dario.faggioli@citrix.com>
commit fa86649c4800bac92c7ba69ec8a16475df3e76f7
Author: Wen Congyang <wency@cn.fujitsu.com>
Date: Tue Jan 19 15:17:42 2016 +0800
tools/libxl: remove unused function libxl__domain_save_device_model()
After the commit d77570e7, libxl__domain_save_device_model() is
completely unused and can be dropped.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit 8bb1c7abdaa2a5654a44a76da60d5bd233026919
Author: Wen Congyang <wency@cn.fujitsu.com>
Date: Tue Jan 19 15:17:41 2016 +0800
tools/libxc: error handling for the postcopy() callback
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit 8ea9d6304ac02fba7f55ef295d92b5d3fae94ad4
Author: Wen Congyang <wency@cn.fujitsu.com>
Date: Tue Jan 19 15:17:40 2016 +0800
tools/libxc: don't send end record if remus fails
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit e73a85e0b45880b98406827d8478a20227977403
Author: Wen Congyang <wency@cn.fujitsu.com>
Date: Tue Jan 19 15:17:39 2016 +0800
remus: resume immediately if libxl__xc_domain_save_done() completes
For example: if the secondary host is down, and we fail to send the data to
the secondary host. xc_domain_save() returns 0. So in the function
libxl__xc_domain_save_done(), rc is 0 (the helper program exits normally),
and retval is 0 (it is xc_domain_save()'s return value). In such case, we
just need to complete the stream.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- updated wording of comment as discussed ]
commit 974af7db71fadb8456f17ae5a6ab40b80c48b3be
Author: Wen Congyang <wency@cn.fujitsu.com>
Date: Tue Jan 19 15:17:38 2016 +0800
remus: don't call stream_continue() when doing failover
stream_continue() is used for migration to read emulator
xenstore data and emulator context. For remus, if we do
failover, we have read it in the checkpoint cycle, and
we only need to complete the stream.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit 794347f5e3b5ce5b94a886f107cb04647aaac281
Author: Wen Congyang <wency@cn.fujitsu.com>
Date: Tue Jan 19 15:17:37 2016 +0800
remus: don't do failover if we don't have a consistent state
We will have a consistent state when a CHECKPOINT_END record
is received. After the first CHECKPOINT_END record is received,
we will buffer all records until the next CHECKPOINT_END record
is received. So if the checkpoint() callback returns XGR_CHECKPOINT_FAILOVER,
we only can do failover if ctx->restore.buffer_all_records is
true.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
commit bf05e88ed7342a91cceba050b6c622accb809842
Author: Jan Beulich <jbeulich@suse.com>
Date: Wed Jan 20 13:50:10 2016 +0100
x86/VMX: prevent INVVPID failure due to non-canonical guest address
While INVLPG (and on SVM INVLPGA) don't fault on non-canonical
addresses, INVVPID fails (in the "individual address" case) when passed
such an address.
Since such intercepted INVLPG are effectively no-ops anyway, don't fix
this in vmx_invlpg_intercept(), but instead have paging_invlpg() never
return true in such a case.
This is CVE-2016-1571 / XSA-168.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit 47abf29a9255b2e7b94e56d66b455d0a584b68b8
Author: Jan Beulich <jbeulich@suse.com>
Date: Wed Jan 20 13:49:23 2016 +0100
x86/mm: PV superpage handling lacks sanity checks
MMUEXT_{,UN}MARK_SUPER fail to check the input MFN for validity before
dereferencing pointers into the superpage frame table.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
get_superpage() has a similar issue.
This is CVE-2016-1570 / XSA-167.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(qemu changes not included)
next reply other threads:[~2016-01-23 17:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-23 17:18 osstest service owner [this message]
2016-01-24 10:32 ` [xen-unstable test] 78811: trouble: broken/fail/pass Ian Campbell
2016-01-24 13:14 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=osstest-78811-mainreport@xen.org \
--to=osstest-admin@xenproject.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.