From: Marc Lefranc <Marc.Lefranc@LaPoste.net>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Marc Lefranc <lefranc.m@free.fr>, linux-kernel@vger.kernel.org
Subject: Re: Problem with AHA152X driver in 2.4.19
Date: 04 Aug 2002 01:58:48 +0200 [thread overview]
Message-ID: <p6rr8hfo5on.fsf@free.fr> (raw)
In-Reply-To: <1028414114.1760.40.camel@irongate.swansea.linux.org.uk>
On 03 Aug 2002 23:35:14 +0100,
Alan Cox <alan@lxorguk.ukuu.org.uk> wrote :
> You need to run through the oops through the ksymoops decoder (see
> REPORTING-BUGS in the kernel)
Sorry about that. Here is a new one:
Aug 4 01:51:14 socrate kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000001b
Aug 4 01:51:14 socrate kernel: c68a21d9
Aug 4 01:51:14 socrate kernel: *pde = 00000000
Aug 4 01:51:14 socrate kernel: Oops: 0000
Aug 4 01:51:14 socrate kernel: CPU: 0
Aug 4 01:51:14 socrate kernel: EIP: 0010:[<c68a21d9>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
Aug 4 01:51:14 socrate kernel: EFLAGS: 00010006
Aug 4 01:51:14 socrate kernel: eax: 00000000 ebx: c2738000 ecx: c30a5e30 edx: c5c58b20
Aug 4 01:51:14 socrate kernel: esi: c5319000 edi: 0000000c ebp: c5319000 esp: c29dde30
Aug 4 01:51:14 socrate kernel: ds: 0018 es: 0018 ss: 0018
Aug 4 01:51:14 socrate kernel: Process tar (pid: 1120, stackpage=c29dd000)
Aug 4 01:51:14 socrate kernel: Stack: 00000297 c116feb4 c2738000 c68a22e3 c2738000 00000000 00000000 00000000
Aug 4 01:51:14 socrate kernel: c687fab0 c687f517 c2738000 c687fab0 00000000 c2738000 c116feb4 c27380b8
Aug 4 01:51:14 socrate kernel: c116feb4 c688662f c2738000 c2738000 00000000 c5319000 c59d3c00 c116fe60
Aug 4 01:51:14 socrate kernel: Call Trace: [<c68a22e3>] [<c687fab0>] [<c687f517>] [<c687fab0>] [<c688662f>]
Aug 4 01:51:14 socrate kernel: [<c6885a5f>] [<c6885ab9>] [<c68984cc>] [<c6898300>] [<c6899e99>] [<c689a4e0>]
Aug 4 01:51:14 socrate kernel: [<c0132ac8>] [<c01394a5>] [<c01088b3>]
Aug 4 01:51:14 socrate kernel: Code: 0f b6 50 1b 8b 14 95 dc 24 27 c0 2b 82 a0 00 00 00 69 c0 a3
>>EIP; c68a21d9 <[aha152x]aha152x_internal_queue+f9/1f0> <=====
Trace; c68a22e3 <[aha152x]aha152x_queue+13/20>
Trace; c687fab0 <[scsi_mod]scsi_done+0/90>
Trace; c687f517 <[scsi_mod]__kstrtab_scsi_deregister_blocked_host+17/27>
Trace; c687fab0 <[scsi_mod]scsi_done+0/90>
Trace; c688662f <[scsi_mod]scsi_request_fn+2bf/300>
Trace; c6885a5f <[scsi_mod]__scsi_insert_special+5f/70>
Trace; c6885ab9 <[scsi_mod]scsi_insert_special_req+19/30>
Trace; c68984cc <[st]st_do_scsi+10c/150>
Trace; c6898300 <[st]st_sleep_done+0/c0>
Trace; c6899e99 <[st]read_tape+119/390>
Trace; c689a4e0 <[st]st_read+3d0/500>
Trace; c0132ac8 <sys_read+98/100>
Trace; c01394a5 <sys_stat64+65/70>
Trace; c01088b3 <system_call+33/40>
Code; c68a21d9 <[aha152x]aha152x_internal_queue+f9/1f0>
00000000 <_EIP>:
Code; c68a21d9 <[aha152x]aha152x_internal_queue+f9/1f0> <=====
0: 0f b6 50 1b movzbl 0x1b(%eax),%edx <=====
Code; c68a21dd <[aha152x]aha152x_internal_queue+fd/1f0>
4: 8b 14 95 dc 24 27 c0 mov 0xc02724dc(,%edx,4),%edx
Code; c68a21e4 <[aha152x]aha152x_internal_queue+104/1f0>
b: 2b 82 a0 00 00 00 sub 0xa0(%edx),%eax
Code; c68a21ea <[aha152x]aha152x_internal_queue+10a/1f0>
11: 69 c0 a3 00 00 00 imul $0xa3,%eax,%eax
And while we are at it, here is the information from the driver as it
starts
Aug 4 01:51:11 socrate kernel: SCSI subsystem driver Revision: 1.00
Aug 4 01:51:12 socrate kernel: aha152x: BIOS test: passed, detected 1 controller(s)
Aug 4 01:51:12 socrate kernel: aha152x: resetting bus...
Aug 4 01:51:12 socrate kernel: aha152x0: vital data: rev=1, io=0x140 (0x140/0x140), irq=11, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=1000, extended translation=disabled
Aug 4 01:51:12 socrate kernel: aha152x0: trying software interrupt, ok.
Aug 4 01:51:12 socrate kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 2.5 $
Aug 4 01:51:13 socrate kernel: (scsi0:3:0) Synchronous Data Transfer Request period = 200 ns, offset = 8
Aug 4 01:51:13 socrate kernel: Vendor: HP Model: C1533A Rev: A812
Aug 4 01:51:13 socrate kernel: Type: Sequential-Access ANSI SCSI revision: 02
Aug 4 01:51:14 socrate kernel: st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
Aug 4 01:51:14 socrate kernel: Attached scsi tape st0 at scsi0, channel 0, id 3, lun 0
Aug 4 01:51:14 socrate kernel: st0: Block limits 1 - 16777215 bytes.
next prev parent reply other threads:[~2002-08-03 23:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-03 17:02 Problem with AHA152X driver in 2.4.19 Marc Lefranc
2002-08-03 22:35 ` Alan Cox
2002-08-03 23:58 ` Marc Lefranc [this message]
2002-08-04 11:33 ` Juergen E. Fischer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=p6rr8hfo5on.fsf@free.fr \
--to=marc.lefranc@laposte.net \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=lefranc.m@free.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.