Re: Linux 2.6.8.1-ac1

[Paul Ionescu <i_p_a_u_l@yahoo.com>]

Hi Alan,

I will try this patch on an IBM T41 Thinkpad, and I am interested in its
IDE Hotplug functionality.
Will I be able to swap IDE devices in my ultrabay without using "idectl 1
rescan" (using this patch only) ?
Do I need any other special tool for ide hotswapping in this case?
Or should I wait for IDE hotplug at the device level ?

Thanks,
Paul

On Tue, 31 Aug 2004 13:08:39 -0400, Alan Cox wrote:

> I've posted up a 2.6.8.1-ac1. This is mostly aimed at people wanting to
> try the newer IDE stuff while I work on feeding it to Bartlomiej.
> 
> http://www.kernel.org/pub/linux/kernel/people/alan/2.6/linux-2.6/2.6.8.1/..
> 
> Change summary for Linux 2.6.8.1-ac1 versus 2.6.8.1
> 
> [ * = submitted to maintainer, + = submitted but needs more work ]
> 
> *	Fix crash on boot or nonworking keyboard driver		(Alan Cox)
> 		with E750x based systems in SMP
> *	Fix timing violation in i8042 driver code		(Alan Cox) *	Allow 3% slack
> for root in strict overcommit		(Alan Cox) *	Add support for 16byte (GPRS)
> pcmcia serial cards	(Alan Cox) *	Reformat buslogic ready for real fixing		
> (indent) *	Support VLAN on 3c59x/3c90x hardware		(Stefan de Konkink) *
> Serial ATA reporting of ATA errors for real diagnostics	(Alan Cox) +	Fix
> IDE locking, /proc races and other uglies		(Alan Cox) +	Initial IT8212 IDE
> driver				(Alan Cox) +	IDE hotplug (controller level)				(Alan Cox) +	Fix
> IDE disk crash on bad geometry			(Alan Cox) +	Fix mishandling of pure LBA
> devices			(Alan Cox) +	Fix problems with non-decoded slaves			(Alan Cox) -
> Fix failure to handle large drives on ALi controllers	(Alan Cox)
> 	| Lost from 2.4-ac to 2.6.
> -	Initial code working at making jiffies removal easier	(Alan Cox)