From: Soeren Sonnenburg <kernel@nn7.de>
To: linux-kernel@vger.kernel.org
Subject: Re: pdc202xx_new + software raid0 freezes on array writes
Date: Wed, 15 Sep 2004 08:18:25 +0200 [thread overview]
Message-ID: <pan.2004.09.15.06.18.23.771355@nn7.de> (raw)
In-Reply-To: 20040914160530.GA729@evilgeek.net
On Tue, 14 Sep 2004 16:05:30 +0000, Peter Mc Aulay wrote:
> Hi...
>
> [NOTE: Please CC replies to me personally as I'm not a list subscriber.
> Thank you.]
>
> I was wondering if anyone could help me at all with a little problem I'm
> having.
>
> I have 4 Western Digital 200GB hard disks (WDC WD2000JB) in a software
> RAID0 setup, two each connected to a Promise Ultra100TX2 (PDC20268) and
> an Ultra133TX2 (PDC20269) (pdc202XX_new driver compiled into the
> kernel). The system itself is a K6-2 450Mhz CPU on an ATX mainboard of
> unknown brand using the ALi M1541/5229 chipset (ALI15X3). It boots from
> a seperate Seagate (ST38410A) hard disk connected to the on-board
> controller.
I had the very same problems with the pdc20268 and also reported them
(that was 1-2 years ago)... I threw them away now and replaced them with
some hpt370 controllers... then also the problems went away...
However I found that using some device on the secondary controller and
accessing that one makes it freeze already...
Soeren
next prev parent reply other threads:[~2004-09-15 6:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-14 16:05 pdc202xx_new + software raid0 freezes on array writes Peter Mc Aulay
2004-09-15 6:18 ` Soeren Sonnenburg [this message]
2004-09-15 16:07 ` Martin Josefsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pan.2004.09.15.06.18.23.771355@nn7.de \
--to=kernel@nn7.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.