[PATCH v3 3/3] Bluetooth: SMP: Serialize root channel replacement

[Cen Zhang <zzzccc427@gmail.com>]

smp_register() replaces the SMP root channels when they are still
registered from an earlier power-on. This happens when management
powers on a controller that is already up with HCI_AUTO_OFF set:
hci_power_on_sync() clears the flag and runs hci_powered_update_sync()
again, which registers SMP so that the channels use the identity address
chosen for this power-on. The WARN_ON() in smp_register() fires on this
path, and the old channels and their SMP data are freed while two kinds
of users can still hold them.

HCI event handlers read hdev->smp_data under hdev->lock, for example
smp_irk_matches() when resolving the target of a directed advertising
report:

  HCI receive worker              Power-on request
  hci_dev_lock(hdev)
  smp_irk_matches()
    chan = hdev->smp_data
                                  hci_powered_update_sync()
                                    smp_register()
                                      smp_del_chan(chan), chan freed
    reads chan->data

SMP receive callbacks run on hdev->workqueue without hdev->lock and use
the ECDH transform of the root, for example smp_cmd_public_key():

  HCI receive worker (SMP)        Power-on request
  smp_cmd_public_key()
    tfm = root's tfm_ecdh
                                  smp_register()
                                    smp_del_chan()
                                      crypto_free_kpp(tfm)
    compute_ecdh_secret(tfm, ...)

Before commit 2ff13894cfb8 ("Bluetooth: Perform HCI update for power on
synchronously") moved it to the request worker, registration ran from the
completion callback of the power-on request in the HCI receive worker,
which serialized it with both users.

Run the registration on hdev->workqueue again and hold hdev->lock while
it replaces the channels. smp_register() waits for the work and returns
its result. Its callers hold the request lock but not hdev->lock,
including hci_power_on() when it updates a controller in the
HCI_AUTO_OFF window. No work on hdev->workqueue takes the request lock,
and hci_dev_close_sync() drains this workqueue only with the request
lock held, so the registration work cannot be queued while it drains.
Users that run under the request lock, such as smp_generate_rpa(), stay
serialized by that lock.

The reports below come from test kernels with scheduling hooks that
widen these windows. The WARN_ON() in smp_register() was printed before
each of them.

KASAN report as below:

    ==================================================================
    BUG: KASAN: slab-use-after-free in smp_irk_matches+0x2fb/0x310
    Read of size 8 at addr ffff88810c35f4a0 by task kworker/u17:0/520

    Workqueue: hci0 hci_rx_work
    Call Trace:
     <TASK>
     dump_stack_lvl+0x93/0xd0
     print_report+0xce/0x630
     kasan_report+0xe0/0x110
     smp_irk_matches+0x2fb/0x310
     process_adv_report.part.0+0x2ce/0x1680
     hci_le_direct_adv_report_evt+0x2f8/0x4c0
     hci_le_meta_evt+0x30c/0x5c0
     hci_event_packet+0x4e8/0xc70
     hci_rx_work+0x367/0xf00
     process_one_work+0x908/0x19c0
     worker_thread+0x65c/0xe40
     kthread+0x34f/0x460
     ret_from_fork+0x659/0x940
     ret_from_fork_asm+0x1a/0x30
     </TASK>

    Allocated by task 522:
     kasan_save_stack+0x33/0x60
     kasan_save_track+0x14/0x30
     __kasan_kmalloc+0xaa/0xb0
     __kmalloc_cache_noprof+0x251/0x610
     l2cap_chan_create+0x47/0x930
     smp_add_cid+0x120/0x4f0
     smp_register+0xa7/0x400
     hci_powered_update_sync+0x88/0x720
     hci_dev_open_sync+0xae0/0x2060
     hci_set_powered_sync+0x2a9/0x720
     set_powered_sync+0xaa/0x150
     hci_cmd_sync_work+0x1b3/0x450
     process_one_work+0x908/0x19c0
     worker_thread+0x65c/0xe40
     kthread+0x34f/0x460
     ret_from_fork+0x659/0x940
     ret_from_fork_asm+0x1a/0x30

    Freed by task 522:
     kasan_save_stack+0x33/0x60
     kasan_save_track+0x14/0x30
     kasan_save_free_info+0x3b/0x60
     __kasan_slab_free+0x5f/0x80
     kfree+0x307/0x580
     l2cap_chan_put+0x273/0x3a0
     smp_del_chan+0x9f/0x170
     smp_register+0x2e8/0x400
     hci_powered_update_sync+0x88/0x720
     hci_set_powered_sync+0x5e5/0x720
     set_powered_sync+0xaa/0x150
     hci_cmd_sync_work+0x1b3/0x450
     process_one_work+0x908/0x19c0
     worker_thread+0x65c/0xe40
     kthread+0x34f/0x460
     ret_from_fork+0x659/0x940
     ret_from_fork_asm+0x1a/0x30

    The buggy address belongs to the object at ffff88810c35f000
     which belongs to the cache kmalloc-2k of size 2048
    The buggy address is located 1184 bytes inside of
     freed 2048-byte region [ffff88810c35f000, ffff88810c35f800)
    ==================================================================

KASAN report as below:

    ==================================================================
    BUG: KASAN: slab-use-after-free in compute_ecdh_secret+0x856/0xa50
    Read of size 4 at addr ffff8881071f4f00 by task kworker/u17:2/500

    Workqueue: hci1 hci_rx_work
    Call Trace:
     <TASK>
     dump_stack_lvl+0x93/0xd0
     print_report+0xce/0x630
     kasan_report+0xe0/0x110
     compute_ecdh_secret+0x856/0xa50
     smp_recv_cb+0x3acf/0x93b0
     l2cap_recv_frame+0x13cc/0x8830
     l2cap_recv_acldata+0xe9f/0x10e0
     hci_rx_work+0x5a6/0xf00
     process_one_work+0x908/0x19c0
     worker_thread+0x65c/0xe40
     kthread+0x34f/0x460
     ret_from_fork+0x659/0x940
     ret_from_fork_asm+0x1a/0x30
     </TASK>

    Allocated by task 497:
     kasan_save_stack+0x33/0x60
     kasan_save_track+0x14/0x30
     __kasan_kmalloc+0xaa/0xb0
     __kmalloc_node_noprof+0x2f2/0x7b0
     crypto_create_tfm_node+0x92/0x390
     crypto_alloc_tfm_node+0xf5/0x220
     smp_add_cid+0xc1/0x4f0
     smp_register+0x9d/0x430
     hci_powered_update_sync+0x82/0x680
     hci_set_powered_sync+0x4f4/0x750
     set_powered_sync+0xb8/0x210
     hci_cmd_sync_work+0x1b3/0x450
     process_one_work+0x908/0x19c0
     worker_thread+0x65c/0xe40
     kthread+0x34f/0x460
     ret_from_fork+0x659/0x940
     ret_from_fork_asm+0x1a/0x30

    Freed by task 497:
     kasan_save_stack+0x33/0x60
     kasan_save_track+0x14/0x30
     kasan_save_free_info+0x3b/0x60
     __kasan_slab_free+0x5f/0x80
     kfree+0x307/0x580
     crypto_destroy_tfm+0xdd/0x230
     smp_del_chan+0x8b/0x180
     smp_register+0x29d/0x430
     hci_powered_update_sync+0x82/0x680
     hci_set_powered_sync+0x4f4/0x750
     set_powered_sync+0xb8/0x210
     hci_cmd_sync_work+0x1b3/0x450
     process_one_work+0x908/0x19c0
     worker_thread+0x65c/0xe40
     kthread+0x34f/0x460
     ret_from_fork+0x659/0x940
     ret_from_fork_asm+0x1a/0x30

    The buggy address belongs to the object at ffff8881071f4f00
     which belongs to the cache kmalloc-128 of size 128
    The buggy address is located 0 bytes inside of
     freed 128-byte region [ffff8881071f4f00, ffff8881071f4f80)
    ==================================================================

Fixes: 2ff13894cfb8 ("Bluetooth: Perform HCI update for power on synchronously")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
---
Assisted-by: LLM

 net/bluetooth/smp.c | 36 +++++++++++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 0e442cc2a35da..552b6b3713c3a 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -3369,7 +3369,8 @@ int smp_force_bredr(struct hci_dev *hdev, bool enable)
 	return 0;
 }
 
-int smp_register(struct hci_dev *hdev)
+static int __smp_register(struct hci_dev *hdev)
+	__must_hold(&hdev->lock)
 {
 	struct l2cap_chan *chan;
 
@@ -3419,6 +3420,39 @@ int smp_register(struct hci_dev *hdev)
 	return 0;
 }
 
+struct smp_register_work {
+	struct work_struct work;
+	struct hci_dev *hdev;
+	int err;
+};
+
+static void smp_register_func(struct work_struct *work)
+{
+	struct smp_register_work *reg =
+		container_of(work, struct smp_register_work, work);
+	struct hci_dev *hdev = reg->hdev;
+
+	hci_dev_lock(hdev);
+	reg->err = __smp_register(hdev);
+	hci_dev_unlock(hdev);
+}
+
+int smp_register(struct hci_dev *hdev)
+{
+	struct smp_register_work reg = { .hdev = hdev };
+
+	/* HCI event handlers use the root channels under hdev->lock, and
+	 * SMP receive callbacks use them from hdev->workqueue. Replace the
+	 * channels from that workqueue while holding hdev->lock.
+	 */
+	INIT_WORK_ONSTACK(&reg.work, smp_register_func);
+	queue_work(hdev->workqueue, &reg.work);
+	flush_work(&reg.work);
+	destroy_work_on_stack(&reg.work);
+
+	return reg.err;
+}
+
 void smp_unregister(struct hci_dev *hdev)
 {
 	struct l2cap_chan *chan;