From: Waqar Hameed <waqar.hameed@axis.com>
To: Vignesh Raghavendra <vigneshr@ti.com>,
Julien Panis <jpanis@baylibre.com>,
William Breathitt Gray <wbg@kernel.org>,
Andrew Davis <afd@ti.com>
Cc: <kernel@axis.com>, <linux-iio@vger.kernel.org>,
<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3] counter: ti-ecap-capture: Use devm_pm_runtime_enable()
Date: Thu, 7 Aug 2025 15:21:08 +0200 [thread overview]
Message-ID: <pnda54bjmij.a.out@axis.com> (raw)
There is no need to register a manual `devm` action for
`pm_runtime_disable()` when `devm_pm_runtime_enable()` exists. It does
the same thing (but also calls `pm_runtime_dont_use_autosuspend()`,
which should be fine here).
Moreover, when `devm_add_action_or_reset()` fails, it is due to a failed
memory allocation and will thus return `-ENOMEM`. `dev_err_probe()`
doesn't do anything when error is `-ENOMEM`. Therefore, the call to
`dev_err_probe()` is useless. Note that `devm_pm_runtime_enable()` has a
tail call to `devm_add_action_or_reset()` and thus returns that value.
Therefore, replace `dev_err_probe()` with the returning value.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
Changes in v3:
* Remove the manual `devm_add_action_or_reset()` and use
`devm_pm_runtime_enable()` instead.
Link to v2: https://lore.kernel.org/lkml/pndms8em7tf.a.out@axis.com/
Changes in v2:
* Split the patch to one seperate patch for each sub-system.
Link to v1: https://lore.kernel.org/all/pnd7c0s6ji2.fsf@axis.com/
drivers/counter/ti-ecap-capture.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/counter/ti-ecap-capture.c b/drivers/counter/ti-ecap-capture.c
index 3faaf7f60539..3586a7ab9887 100644
--- a/drivers/counter/ti-ecap-capture.c
+++ b/drivers/counter/ti-ecap-capture.c
@@ -465,11 +465,6 @@ static irqreturn_t ecap_cnt_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void ecap_cnt_pm_disable(void *dev)
-{
- pm_runtime_disable(dev);
-}
-
static int ecap_cnt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -523,12 +518,9 @@ static int ecap_cnt_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, counter_dev);
- pm_runtime_enable(dev);
-
- /* Register a cleanup callback to care for disabling PM */
- ret = devm_add_action_or_reset(dev, ecap_cnt_pm_disable, dev);
+ ret = devm_pm_runtime_enable(dev);
if (ret)
- return dev_err_probe(dev, ret, "failed to add pm disable action\n");
+ return ret;
ret = devm_counter_add(dev, counter_dev);
if (ret)
base-commit: 260f6f4fda93c8485c8037865c941b42b9cba5d2
--
2.39.5
next reply other threads:[~2025-08-07 13:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-07 13:21 Waqar Hameed [this message]
2025-08-07 13:56 ` [PATCH v3] counter: ti-ecap-capture: Use devm_pm_runtime_enable() Andrew Davis
2025-08-24 8:06 ` William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pnda54bjmij.a.out@axis.com \
--to=waqar.hameed@axis.com \
--cc=afd@ti.com \
--cc=jpanis@baylibre.com \
--cc=kernel@axis.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=vigneshr@ti.com \
--cc=wbg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.