From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 1/2] omap soc updates for v4.8 merge window
Date: Thu, 30 Jun 2016 00:13:00 -0700 [thread overview]
Message-ID: <pull-1467270686-995259> (raw)
The following changes since commit 1a695a905c18548062509178b98bc91e67510864:
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.8/soc-signed
for you to fetch changes up to 44e7475d40eb26b8d3a6e2b2f7a5f12a5fe0942e:
ARM: OMAP2+: Fix build if CONFIG_SMP is not set (2016-06-27 23:30:02 -0700)
----------------------------------------------------------------
SoC related changes for omaps for v4.8 merge window:
- A series of DSS platform_data fixes to prepare for DSS driver changes
- Add tblck clck aliases for PWM
- A series of trivial spelling corrections
- Remove bogus eQEP, ePWM and eCAP hwmod entries
- A series of McBSP sidetone fixes
- Remove QSPI and DSS addresses from hwmod, these come from dts
- Fix RSTST register offset for pruss
- Make ti81xx_rtc_hwmod static
- Remove wrongly defined RSTST offset for PER Domain, note
that the subject for this one wrongly has "dts" in the
subject
- Add support for omap5 and dra7 workaround for 801819
- A series of patches to make kexec work for SMP omaps
----------------------------------------------------------------
Andrea Gelmini (7):
ARM: OMAP1: Fix typo in fiq.c
ARM: OMAP1: Fix typo in mtd-xip.h
ARM: OMAP2+: Fix typo in cm3xxx.c
ARM: OMAP2+: Fix typo in mux34xx.c
ARM: OMAP2+: Fix typo in omap4-common.c
ARM: OMAP2+: Fix typo in omap_device.c
ARM: OMAP2+: Fix typo in sdrc.h
Ben Dooks (1):
ARM: OMAP: make ti81xx_rtc_hwmod static
Franklin S Cooper Jr (2):
clk: ti: am335x/am4372: Add tbclk to pwm node
ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
Keerthy (2):
ARM: AM43XX: hwmod: Fix RSTST register offset for pruss
ARM: dts: am43xx: Remove wrongly defined RSTST offset for PER Domain
Nishanth Menon (1):
ARM: OMAP5 / DRA7: Introduce workaround for 801819
Peter Ujfalusi (10):
ARM: OMAP: rx51-video: Do not set TV connector_type
ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h
video/platform_data: omapdss: Create new header file for platform data
ARM: OMAP2: Use the platform_data header for omapdss
ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
ASoC: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
Tomi Valkeinen (1):
ARM: DRA7: hwmod: remove DSS addresses from hwmod
Tony Lindgren (7):
Merge branch 'peter/for-4.8_omapdss_part1' of https://github.com/omap-audio/linux-audio into omap-for-v4.8/soc
Merge commit 'c0053bd50af5' into omap-for-v4.8/soc
ARM: OMAP4+: Initialize SAR RAM base early for proper CPU1 reset for kexec
ARM: OMAP4+: Prevent CPU1 related hang with kexec
ARM: OMAP4+: Reset CPU1 properly for kexec
ARM: OMAP4+: Allow kexec on SMP variants
ARM: OMAP2+: Fix build if CONFIG_SMP is not set
Vignesh R (1):
ARM: DRA7: hwmod: Remove QSPI address space entry from hwmod
arch/arm/mach-omap1/ams-delta-fiq.c | 2 +-
arch/arm/mach-omap1/include/mach/mtd-xip.h | 2 +-
arch/arm/mach-omap2/Kconfig | 8 ++
arch/arm/mach-omap2/Makefile | 4 +-
arch/arm/mach-omap2/board-ldp.c | 3 +-
arch/arm/mach-omap2/board-rx51-video.c | 4 +-
arch/arm/mach-omap2/cm3xxx.c | 2 +-
arch/arm/mach-omap2/common.h | 8 +-
arch/arm/mach-omap2/display.c | 2 +-
arch/arm/mach-omap2/display.h | 5 +
arch/arm/mach-omap2/dss-common.c | 2 +-
arch/arm/mach-omap2/io.c | 3 +
arch/arm/mach-omap2/mcbsp.c | 31 ++---
arch/arm/mach-omap2/mux34xx.c | 4 +-
arch/arm/mach-omap2/omap-headsmp.S | 18 ++-
arch/arm/mach-omap2/omap-hotplug.c | 6 +
arch/arm/mach-omap2/omap-mpuss-lowpower.c | 29 ++++-
arch/arm/mach-omap2/omap-secure.h | 1 +
arch/arm/mach-omap2/omap-smp.c | 140 ++++++++++++++++-----
arch/arm/mach-omap2/omap4-common.c | 16 ++-
arch/arm/mach-omap2/omap_device.c | 2 +-
.../mach-omap2/omap_hwmod_33xx_43xx_common_data.h | 18 ---
.../omap_hwmod_33xx_43xx_interconnect_data.c | 64 ----------
.../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 85 +------------
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 9 --
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 +---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 54 --------
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 41 ------
arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 2 +-
arch/arm/mach-omap2/pdata-quirks.c | 18 +++
arch/arm/mach-omap2/prcm43xx.h | 1 +
arch/arm/mach-omap2/prm33xx.h | 2 -
arch/arm/mach-omap2/sdrc.h | 4 +-
drivers/clk/ti/clk-33xx.c | 3 +
drivers/clk/ti/clk-43xx.c | 6 +
include/linux/platform_data/asoc-ti-mcbsp.h | 4 +-
include/linux/platform_data/omapdss.h | 42 +++++++
include/video/omapdss.h | 31 +----
sound/soc/omap/mcbsp.c | 21 +++-
sound/soc/omap/mcbsp.h | 3 +-
sound/soc/omap/omap-mcbsp.c | 5 +-
41 files changed, 320 insertions(+), 409 deletions(-)
create mode 100644 include/linux/platform_data/omapdss.h
next reply other threads:[~2016-06-30 7:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-30 7:13 Tony Lindgren [this message]
2016-06-30 7:13 ` [GIT PULL 2/2] dtc warning fixes for omaps for v4.8 merge window Tony Lindgren
2016-06-30 7:13 ` Tony Lindgren
[not found] ` <5774c68b.4130620a.bf46e.ffffe39dSMTPIN_ADDED_BROKEN@mx.google.com>
2016-07-06 5:33 ` Olof Johansson
2016-07-06 5:33 ` Olof Johansson
-- strict thread matches above, loose matches on Subject: below --
2016-06-30 7:13 [GIT PULL 1/2] omap soc updates " Tony Lindgren
[not found] <5774c688.0137620a.4e207.ffffb69fSMTPIN_ADDED_BROKEN@mx.google.com>
2016-07-06 5:32 ` Olof Johansson
2016-07-06 5:32 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pull-1467270686-995259 \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.