From: Stefan Roesch <shr@devkernel.io>
To: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
Andrew Morton <akpm@linux-foundation.org>,
kernel-team@fb.com, linux-mm@kvack.org, riel@surriel.com,
mhocko@suse.com, linux-kselftest@vger.kernel.org,
linux-doc@vger.kernel.org, Hugh Dickins <hughd@google.com>
Subject: Re: [PATCH v4 0/3] mm: process/cgroup ksm support
Date: Mon, 03 Apr 2023 09:34:59 -0700 [thread overview]
Message-ID: <qvqwlej8vrst.fsf@dev0134.prn3.facebook.com> (raw)
In-Reply-To: <f969cb1f-651f-592f-7540-89f73e175c7d@redhat.com>
David Hildenbrand <david@redhat.com> writes:
>>>> Obviously we could spend months analysing which exact allocations are
>>>> identical, and then more months or years reworking the architecture to
>>>> deduplicate them by hand and in userspace. But this isn't practical,
>>>> and KSM is specifically for cases where this isn't practical.
>>>> Based on your request in the previous thread, we investigated whether
>>>> the boost was coming from the unintended side effects of KSM splitting
>>>> THPs. This wasn't the case.
>>>> If you have other theories on how the results could be bogus, we'd be
>>>> happy to investigate those as well. But you have to let us know what
>>>> you're looking for.
>>>>
>>>
>>> Maybe I'm bad at making such requests but
>>>
>>> "Stefan, can you do me a favor and investigate which pages we end up
>>> deduplicating -- especially if it's mostly only the zeropage and if it's
>>> still that significant when disabling THP?"
>>>
>>> "In any case, it would be nice to get a feeling for how much variety in
>>> these 20% of deduplicated pages are. "
>>>
>>> is pretty clear to me. And shouldn't take months.
>>>
>
> Just to clarify: the details I requested are not meant to decide whether to
> reject the patch set (I understand that it can be beneficial to have); I
> primarily want to understand if we're really dealing with a workload where KSM
> is able to deduplicate pages that are non-trivial, to maybe figure out if there
> are other workloads that could similarly benefit -- or if we could optimize KSM
> for these specific cases or avoid the memory deduplication altogether.
>
> In contrast to e.g.:
>
> 1) THP resulted in many zeropages we end up deduplicating again. The THP
> placement was unfortunate.
>
> 2) Unoptimized memory allocators that leave many identical pages mapped
> after freeing up memory (e.g., zeroed pages, pages all filled with
> poison values) instead of e.g., using MADV_DONTNEED to free up that
> memory.
>
>
I repeated an experiment with and without KSM. In terms of THP there is
no huge difference between the two. On a 64GB main memory machine I see
between 100 - 400MB in AnonHugePages.
>> /sys/kernel/mm/ksm/pages_shared is over 10000 when we run this on an
>> Instagram workload. The workload consists of 36 processes plus a few
>> sidecar processes.
>
> Thanks! To which value is /sys/kernel/mm/ksm/max_page_sharing set in that
> environment?
>
It's set to the standard value of 256.
In the meantime I have run experiments with different settings for
pages_to_scan. With the default value of 100, we only get a relatively
small benefit of KSM. If I increase the value to for instance to 2000 or
3000 the savings are substantial. (The workload is memory bound, not
CPU bound).
Here are some stats for setting pages_to_scan to 3000:
full_scans: 560
general_profit: 20620539008
max_page_sharing: 256
merge_across_nodes: 1
pages_shared: 125446
pages_sharing: 5259506
pages_to_scan: 3000
pages_unshared: 1897537
pages_volatile: 12389223
run: 1
sleep_millisecs: 20
stable_node_chains: 176
stable_node_chains_prune_millisecs: 2000
stable_node_dups: 2604
use_zero_pages: 0
zero_pages_sharing: 0
> What would be interesting is pages_shared after max_page_sharing was set to a
> very high number such that pages_shared does not include duplicates. Then
> pages_shared actually expresses how many different pages we deduplicate. No need
> to run without THP in that case.
>
Thats on my list for the next set of experiments.
> Similarly, enabling "use_zero_pages" could highlight if your workload ends up
> deduplciating a lot of zeropages. But maxing out max_page_sharing would be
> sufficient to understand what's happening.
>
>
I already run experiments with use_zero_pages, but they didn't make a
difference. I'll repeat the experiment with a higher pages_to_scan
value.
>> Each of these individual processes has around 500MB in KSM pages.
>>
>
> That's really a lot, thanks.
>
>> Also to give some idea for individual VMA's
>> 7ef5d5600000-7ef5e5600000 rw-p 00000000 00:00 0 (Size: 262144 KB, KSM:
>> 73160 KB)
>>
>
> I'll have a look at the patches today.
next prev parent reply other threads:[~2023-04-03 16:45 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-10 18:28 [PATCH v4 0/3] mm: process/cgroup ksm support Stefan Roesch
2023-03-10 18:28 ` [PATCH v4 1/3] mm: add new api to enable ksm per process Stefan Roesch
2023-03-13 16:26 ` Johannes Weiner
2023-04-03 10:37 ` David Hildenbrand
2023-04-03 11:03 ` David Hildenbrand
2023-04-04 16:32 ` Stefan Roesch
2023-04-04 16:43 ` Stefan Roesch
2023-04-05 6:51 ` Christian Borntraeger
2023-04-05 16:04 ` David Hildenbrand
2023-04-03 15:50 ` Stefan Roesch
2023-04-03 17:02 ` David Hildenbrand
2023-03-10 18:28 ` [PATCH v4 2/3] mm: add new KSM process and sysfs knobs Stefan Roesch
2023-04-05 17:04 ` David Hildenbrand
2023-04-05 21:20 ` Stefan Roesch
2023-04-06 13:23 ` David Hildenbrand
2023-04-06 14:16 ` Johannes Weiner
2023-04-06 14:32 ` David Hildenbrand
2023-03-10 18:28 ` [PATCH v4 3/3] selftests/mm: add new selftests for KSM Stefan Roesch
2023-03-15 20:03 ` [PATCH v4 0/3] mm: process/cgroup ksm support David Hildenbrand
2023-03-15 20:23 ` Mike Kravetz
2023-03-15 21:05 ` Johannes Weiner
2023-03-15 21:19 ` Johannes Weiner
2023-03-15 21:45 ` David Hildenbrand
2023-03-15 21:47 ` David Hildenbrand
2023-03-30 16:19 ` Stefan Roesch
2023-03-28 23:09 ` Andrew Morton
2023-03-30 4:55 ` David Hildenbrand
2023-03-30 14:26 ` Johannes Weiner
2023-03-30 14:40 ` David Hildenbrand
2023-03-30 16:41 ` Stefan Roesch
2023-04-03 9:48 ` David Hildenbrand
2023-04-03 16:34 ` Stefan Roesch [this message]
2023-04-03 17:04 ` David Hildenbrand
2023-04-06 16:59 ` Stefan Roesch
2023-04-06 17:10 ` David Hildenbrand
2023-03-30 20:18 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=qvqwlej8vrst.fsf@dev0134.prn3.facebook.com \
--to=shr@devkernel.io \
--cc=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=kernel-team@fb.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=riel@surriel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.