From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: Date: Wed, 04 Aug 2004 17:22:13 -0700 From: "Nivedita Pitre" To: Cc: Subject: Re: Linux booting problems in the IBM Bubinga Board Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Yes, I tried both with and without the console= argument, selecting ttyS0 and baud 9600. Same result. >>> Wolfgang Denk 08/04/04 05:03PM >>> In message you wrote: > > I am using U-boot to boot linux kernel on the IBM Bubinga (405EP board). Using kernel version 2.6.7, which has a default config file for this board. Changed the board info structure to match u-boot's board information structure. Using the mkimage utilit PLEASE don't use such long lines. Press ENTER after some 60...70 characters or so. > ach_dep calls output some messages. This tells me that code reaches in start_kernel, however, after console_init, the serial port dies. I assume this is because we initialize the serial port, and turn off early debug. I commented o Did you pass some "console=..." boot argument? Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de One difference between a man and a machine is that a machine is quiet when well oiled. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/