From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Emu10k1x status Date: Tue, 11 May 2004 13:02:08 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <403154C2.3020701@netzero.net> <403354B9.8000305@netzero.net> <40340A6B.7080507@netzero.net> <403FAA2E.1040600@netzero.net> <40A014FF.90107@netzero.net> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <40A014FF.90107@netzero.net> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Francisco Moraes Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Mon, 10 May 2004 19:49:19 -0400, Francisco Moraes wrote: > > Hi everybody, > > Just wanted to share the status of the Emu10k1x driver (Dell SB Live! > Value). I've finally got PCM playback working at 48000khz and a 32Kb > buffer. I haven't tried too much more than this which is hard because of > lack of specs for the card. great, thanks for your work! > I am doing some clean up and I hope to have a first pass of the drive > submitted soon. yes, please. we can review the problem. > By the way, I've also added support for the joystick port on the card. > This could have been done by simply adding the PCI ID into the > drivers/char/joystick/emu10k1-gp.c driver in the linux kernel. Any > suggestions or preferences of whether this should be changed in the > kernel driver or in the alsa driver itself like I have at the moment? no, it's an independent driver. please submit the patch to the author of the emu10k1-gp driver (Vojtech). Takashi ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3