Re: Re: [Alsa-user] fm801 driver status?

[Takashi Iwai <tiwai@suse.de>]

At Thu, 12 Dec 2002 17:27:38 +0100,
Friedrich Ewaldt wrote:
> 
> Hi,
> many thanks for your quick reply! Here's some more info:
> 
> Mandrake Control Center recognices the card as follows (partly in 
> german, sorry, but perhaps that's no problem in ERL/NUE ;-) ):
> 
> Hersteller: Fortemedia, Inc
> Bus: PCI
> Bus: 1319:801:1319:1319
> Standort auf den Bus: 0:b:0
> Beschreibung: Xwave QS3000A [FM801]
> Modul: snd-fm801
> Medienklasse: MULTIMEDIA_AUDIO
> 
> I had no alsa installed while running hardware detection.

you can check this also via lspci command.
in the output of lspci in your last mail, the i/o ports and irq are
missing.  please check again?


> The soundcard is working correctly under win98 without the need to 
> change any hardware or bios settings.
> win98 reports:
> fm801 pci audio, IRQ 10, I/O: EC00-EC7F
> plus
> fm801 pci audio, IRQ 11
> and 'no conflicts'. I.e. win98 shows up the same IRQs used as lspci, 
> that should be correct, then. But lspci doesn't name any memory regions 
> used by this card. Do you have any idea what I could try? (I'll test 
> some other bios settings, mounting the card in another slot when I find 
> some spare time).

what is the bios configuration?  pnp os is yes?  then set it to no.
is ACPI enabled on kernel?


Takashi


-------------------------------------------------------
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility 
Learn to use your power at OSDN's High Performance Computing Channel
http://hpc.devchannel.org/