From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: rc2 stereo problem with via8233 Date: Thu, 27 Jun 2002 16:23:43 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <15642.10186.820516.331246@ccs.covici.com> <15643.7633.177373.448813@ccs.covici.com> Mime-Version: 1.0 (generated by SEMI 1.14.3 - "Ushinoya") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <15643.7633.177373.448813@ccs.covici.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: covici@ccs.covici.com Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Thu, 27 Jun 2002 10:14:41 -0400, John covici wrote: > > OK, here is -xvv for that controller. > > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 30) > Subsystem: VIA Technologies, Inc.: Unknown device 4511 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 11 > Region 0: I/O ports at ec00 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 06 11 59 30 01 00 10 02 30 00 01 04 00 00 00 00 > 10: 01 ec 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 11 45 > 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 03 00 00 > > and here is the -nvv > 00:11.5 Class 0401: 1106:3059 (rev 30) > Subsystem: 1106:4511 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 11 > Region 0: I/O ports at ec00 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- thanks. > When I was using it, a stereo sample did play on both channels, from > the cd, from pcm, they were mono -- I didn't test with stereo for the > pcm. Is this sound card a multi channel and if so, how do I use more > than one channel? i meant, to test wavefiles with mono samples and stereo samples, and check if any difference occurs. to be sure: the pcm with stereo samples comes out only from the left speaker, right? Takashi ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/