All of lore.kernel.org
 help / color / mirror / Atom feed
* Re: Alsa-devel digest, Vol 1 #3297 - 13 msgs
       [not found] <20050512154727.B414212F1B@sc8-sf-spam2.sourceforge.net>
@ 2005-05-12 20:46 ` spiral
  2005-05-13  7:36   ` Takashi Iwai
  0 siblings, 1 reply; 2+ messages in thread
From: spiral @ 2005-05-12 20:46 UTC (permalink / raw)
  To: alsa-devel

Hi,

I can't have this patch working... I don't manage to set position_fix=1... How 
should I do so ? Maybe isn't it up2date on the cvs ?

Anyway, I give a copy of "cat /proc/asound/card0/codec#*" here :

Codec: Realtek ALC880
Address: 0
Vendor Id: 0x10ec0880
Subsystem Id: 0x0
Revision Id: 0x90500
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x411: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x411: Stereo
  PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x04 [Audio Output] wcaps 0x411: Stereo
  PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x05 [Audio Output] wcaps 0x411: Stereo
  PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  PCM: rates 0x160, bits 0x1e, types 0x1
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
  Amp-In vals: 0x00 0x00
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 7
     0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
  Amp-In vals: 0x00 0x00
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 7
     0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
  Amp-In vals: 0x00 0x00
  PCM: rates 0x160, bits 0x06, types 0x1
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
  PCM: rates 0x160, bits 0x1e, types 0x1
  Connection: 1
     0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
  Amp-In vals: 0xa3 0xa3
  Connection: 8
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: 0x00 0x00
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals: 0x40 0x40
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: 0x00 0x00
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals: 0x40 0x40
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: 0x00 0x00
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals: 0x40 0x40
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: 0x00 0x00
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals: 0x40 0x40
  Connection: 2
     0x05 0x0b
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x0c* 0x0d 0x0e 0x0f
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x00 0x00
  Pincap 0x083f: IN OUT HP
  Pin Default 0x01014020: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x00 0x00
  Pincap 0x083f: IN OUT HP
  Pin Default 0x01014021: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x00 0x00
  Pincap 0x083f: IN OUT HP
  Pin Default 0x01019022: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Pink
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0e
Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x083f: IN OUT HP
  Pin Default 0x01013023: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Blue
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0f
Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x08133f: IN OUT HP
  Pin Default 0x01a19031: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
  Pin-ctls: 0x20: IN
  Connection: 1
     0x10
Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x08133f: IN OUT HP
  Pin Default 0x02a19060: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
  Pin-ctls: 0x20: IN
  Connection: 1
     0x11
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x80 0x80
  Pincap 0x08133f: IN OUT HP
  Pin Default 0x01813030: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
  Pin-ctls: 0x20: IN
  Connection: 1
     0x12
Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: 0x00 0x00
  Pincap 0x08133f: IN OUT HP
  Pin Default 0x02214050: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x13
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x0820: IN
  Pin Default 0x9933f170: [Fixed] CD at Int ATAPI
    Conn = ATAPI, Color = Other
  Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x0820: IN
  Pin Default 0x99f3f180: [Fixed] Other at Int ATAPI
    Conn = ATAPI, Color = Other
  Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x0810: OUT
  Pin Default 0x01442100: [Jack] SPDIF Out at Ext Rear
    Conn = RCA, Color = Grey
  Pin-ctls: 0x00:
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
  Pincap 0x0820: IN
  Pin Default 0x01c42110: [Jack] SPDIF In at Ext Rear
    Conn = RCA, Color = Grey
  Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono

Thanks for your help

Goodbye


-- 
spiral


Le Jeudi 12 Mai 2005 17:45, alsa-devel-request@lists.sourceforge.net a écrit :
> Date: Thu, 12 May 2005 16:25:02 +0200
> From: Takashi Iwai <tiwai@suse.de>
> To: fab <fab@gnux.info>
> Cc: alsa-devel@lists.sourceforge.net
> Subject: Re: [Alsa-devel] Medion + intel hda tests
>
> At Wed, 11 May 2005 00:02:38 +0200,
>
> fab wrote:
> > Hi,
> > since I reported bugs as well as I can and gave no answers,
>
> Since I've been in vacation and had no net access ;);)
>
> >  I started to
> > do some very basic tests and sourcecode reading.
> > I tried to modprobe snd-hda-intel with different "model" option and then
> > tested all the outputs, I only marked the working ones :
> >
> > Availables inputs:
> >  [front] [surround] [center] , [headphone]
> > tested model :
> >  3stack        : front
> >  3stack-digout : front
> >  5stack        : front
> >  5stack-digout : front
> >  w810          : front surround
>
> This implies that the pin assignment is different from what the normal
> models suppose.
>
> I added the "test" model for debugging such cases to ALSA CVS.
> Try ALSA CVS version (driver and lib), and set "model=test" module
> option to snd-hda-intel module.  Then you'll have fully controllable
> volumes and switches.
>
> The noisy output may be fixed by setting "position_fix=1" or
> "position_fix=2" module option.
>
> Anyway, please show the content of /proc/asound/card0/codec#* file.
>
>
> Takashi


-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_ids93&alloc_id\x16281&op=click

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: Re: Alsa-devel digest, Vol 1 #3297 - 13 msgs
  2005-05-12 20:46 ` Alsa-devel digest, Vol 1 #3297 - 13 msgs spiral
@ 2005-05-13  7:36   ` Takashi Iwai
  0 siblings, 0 replies; 2+ messages in thread
From: Takashi Iwai @ 2005-05-13  7:36 UTC (permalink / raw)
  To: spiral; +Cc: alsa-devel

At Thu, 12 May 2005 22:46:08 +0200,
spiral wrote:
> 
> Hi,
> 
> I can't have this patch working... I don't manage to set position_fix=1... How 
> should I do so ? Maybe isn't it up2date on the cvs ?

Yes, anonymous cvs tree on sf isn't sync'ed immediately.
It should be fine now.


Takashi


-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2005-05-13  7:36 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20050512154727.B414212F1B@sc8-sf-spam2.sourceforge.net>
2005-05-12 20:46 ` Alsa-devel digest, Vol 1 #3297 - 13 msgs spiral
2005-05-13  7:36   ` Takashi Iwai

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.