From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: ice1724: from 1.0.4 to 1.0.5a upgrading problem Date: Wed, 14 Jul 2004 15:32:00 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <200407141718.03846@goldspace.net> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <200407141718.03846@goldspace.net> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Andrew Gaydenko Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Wed, 14 Jul 2004 17:18:03 +0400, Andrew Gaydenko wrote: > > Hi, > > After upgrading the driver from 1.0.4 to 1.0.5a I'm not able to start jack server > with 96000 rate for alsa driver. I use hw:0,1 device which is digital out in my > Terratek Aureon Space 7.1. Instead of 96000, jack server starts with 48000. For > hw:0,0 the problem doesn't take place. Can anybody point me further direction to > resolve the problem? The digital out doesn't support 96kHz (yet)... > P.S. BTW, 1.0.5a driver has few new mixer controls. What are meaning of > these controls: 'ADC Oversampling' and 'DAC Deemphasis Switch'? The former defines the oversampling range, either 128 or 64 times. The latter is a toggle switch to turn on/off deemphasis (I forgot the frequency...) You can turn if off unless you need something special. Takashi ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com