From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: How to put 16bit none audio PCM data stream into a 32bit none audio S/P-DIF transport stream? Date: Wed, 09 Apr 2003 13:09:12 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20030408140230.GA1987@ulima.unil.ch> <3E934193.6090605@cucumelo.org> <20030408205515.GB6940@ulima.unil.ch> <3E933EF6.5030601@superbug.demon.co.uk> <3E93C4CA.4080604@cucumelo.org> <20030409082815.GA14489@ulima.unil.ch> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20030409082815.GA14489@ulima.unil.ch> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Gregoire Favre Cc: Benny Sjostrand , James Courtier-Dutton , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Wed, 9 Apr 2003 10:28:15 +0200, Gregoire Favre wrote: > > On Wed, Apr 09, 2003 at 08:59:22AM +0200, Benny Sjostrand wrote: > > > All tests I've done with xine it always output the AC3 data on 48khz, > > which should work fine. > > Well, maybe with your receiver you are lucky... we have seen those days > in this ml quiete a few people for which it doesn't work with there > receivers. i can hear ac3 5.1 output over spdif with a terratec xfire 1024 without problems. i guess it's not the choice of receiver but the card itself. there are differences between the cards even with the same cs46xx chip depending on the hardware implementation. > And as for me it works under windows, I think there is a problem in the > software. yes it should be a driver bug. but note that without the real (problematic) hardware, it's difficult to check (especially if the system of developers do really work :) ... Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf