From: Takashi Iwai <tiwai@suse.de>
To: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: alsa-devel@alsa-project.org, andrzej@gansiniec.pl,
clemens@ladisch.de, ffado-devel@lists.sf.net
Subject: Re: [PATCH] ALSA: bebob: support Firewire I/O card of Mackie Onyx 1220/1620/1640
Date: Sun, 04 Oct 2015 17:22:46 +0200 [thread overview]
Message-ID: <s5h7fn2d5fd.wl-tiwai@suse.de> (raw)
In-Reply-To: <1443917823-13516-1-git-send-email-o-takashi@sakamocchi.jp>
On Sun, 04 Oct 2015 02:17:03 +0200,
Takashi Sakamoto wrote:
>
> Current ALSA BeBoB drivers has an entry for this model, while the value of
> vendor ID seems to be wrong according to an user's report.
>
> The vendor had released no updated firmware, thus we can judge that this
> model had not changed the content of its config ROM. It's reasonable to fix
> the ID according to the report.
>
> $ ./linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
>
> ROM header and bus information block
> -----------------------------------------------------------------
> 400 0425720f bus_info_length 4, crc_length 37, crc 29199
> 404 31333934 bus_name "1394"
> 408 f0646122 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100,
> max_rec 6 (128), max_rom 1, gen 2, spd 2 (S400)
> 40c 00000ff2 company_id 00000f |
> 410 00004697 device_id f200004697 | EUI-64 00000ff200004697
>
> root directory
> -----------------------------------------------------------------
> 414 000859be directory_length 8, crc 22974
> 418 04000082 hardware version
> 41c 0c0083c0 node capabilities per IEEE 1394
> 420 03000ff2 vendor
> 424 8100000a --> descriptor leaf at 44c
> 428 17010065 model
> 42c 8100000d --> descriptor leaf at 460
> 430 13000910 version
> 434 d1000001 --> unit directory at 438
>
> unit directory at 438
> -----------------------------------------------------------------
> 438 0004ccec directory_length 4, crc 52460
> 43c 1200a02d specifier id: 1394 TA
> 440 13010001 version: AV/C
> 444 17010065 model
> 448 8100000d --> descriptor leaf at 47c
>
> descriptor leaf at 44c
> -----------------------------------------------------------------
> 44c 0004152a leaf_length 4, crc 5418
> 450 00000000 textual descriptor
> 454 00000000 minimal ASCII
> 458 4d61636b "Mack"
> 45c 69650000 "ie"
>
> descriptor leaf at 460
> -----------------------------------------------------------------
> 460 000612b5 leaf_length 6, crc 4789
> 464 00000000 textual descriptor
> 468 00000000 minimal ASCII
> 46c 4f6e7978 "Onyx"
> 470 20466972 " Fir"
> 474 65776972 "ewir"
> 478 65000000 "e"
>
> descriptor leaf at 47c
> -----------------------------------------------------------------
> 47c 000612b5 leaf_length 6, crc 4789
> 480 00000000 textual descriptor
> 484 00000000 minimal ASCII
> 488 4f6e7978 "Onyx"
> 48c 20466972 " Fir"
> 490 65776972 "ewir"
> 494 65000000 "e"
>
> $ cat /proc/asound/card3/firewire/firmware
> Manufacturer: bridgeCo
> Protocol Ver: 1
> Build Ver: 0
> GUID: 0x00000FF200004697
> Model ID: 0x82
> Model Rev: 1
> Firmware Date: 20040430
> Firmware Time: 131527
> Firmware ID: 0x10065
> Firmware Ver: 2320
> Base Addr: 0x20080000
> Max Size: 1572864
> Loader Date: 20040430
> Loader Time: 112036
>
> Reported-by: Andrzej Gansiniec <andrzej@gansiniec.pl>
> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Thanks, applied now.
Takashi
> ---
> sound/firewire/bebob/bebob.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
> index 27a04ac..0ed5e5f 100644
> --- a/sound/firewire/bebob/bebob.c
> +++ b/sound/firewire/bebob/bebob.c
> @@ -41,7 +41,8 @@ static DECLARE_BITMAP(devices_used, SNDRV_CARDS);
> #define VEN_EDIROL 0x000040ab
> #define VEN_PRESONUS 0x00000a92
> #define VEN_BRIDGECO 0x000007f5
> -#define VEN_MACKIE 0x0000000f
> +#define VEN_MACKIE1 0x0000000f
> +#define VEN_MACKIE2 0x00000ff2
> #define VEN_STANTON 0x00001260
> #define VEN_TASCAM 0x0000022e
> #define VEN_BEHRINGER 0x00001564
> @@ -360,9 +361,9 @@ static const struct ieee1394_device_id bebob_id_table[] = {
> /* BridgeCo, Audio5 */
> SND_BEBOB_DEV_ENTRY(VEN_BRIDGECO, 0x00010049, &spec_normal),
> /* Mackie, Onyx 1220/1620/1640 (Firewire I/O Card) */
> - SND_BEBOB_DEV_ENTRY(VEN_MACKIE, 0x00010065, &spec_normal),
> + SND_BEBOB_DEV_ENTRY(VEN_MACKIE2, 0x00010065, &spec_normal),
> /* Mackie, d.2 (Firewire Option) */
> - SND_BEBOB_DEV_ENTRY(VEN_MACKIE, 0x00010067, &spec_normal),
> + SND_BEBOB_DEV_ENTRY(VEN_MACKIE1, 0x00010067, &spec_normal),
> /* Stanton, ScratchAmp */
> SND_BEBOB_DEV_ENTRY(VEN_STANTON, 0x00000001, &spec_normal),
> /* Tascam, IF-FW DM */
> --
> 2.1.4
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
next prev parent reply other threads:[~2015-10-04 15:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-04 0:17 [PATCH] ALSA: bebob: support Firewire I/O card of Mackie Onyx 1220/1620/1640 Takashi Sakamoto
2015-10-04 15:22 ` Takashi Iwai [this message]
2015-10-07 13:38 ` [FFADO-devel] " Stefan Richter
2015-10-07 14:19 ` Stefan Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h7fn2d5fd.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=andrzej@gansiniec.pl \
--cc=clemens@ladisch.de \
--cc=ffado-devel@lists.sf.net \
--cc=o-takashi@sakamocchi.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.