Re: [Fwd: HP DV4 1155 SE - No Sound through speakers...]

[Takashi Iwai <tiwai@suse.de>]

At Mon, 2 Feb 2009 12:01:08 -0500,
Tim Barnette wrote:
> 
> [1  <text/plain; ISO-8859-1 (7bit)>]
> 
> [2  <text/html; ISO-8859-1 (quoted-printable)>]
> Thanks, a few more questions.. sorry I don't understand most of this..
> 1) hda-verb - I can't find this.. what is it? Where do I run it?

See Documentation/sound/alsa/HD-Audio.txt in the recent linux tree, or
   ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/docs/HD-Audio.pdf

> 2) Inside of the snapshot, there are three steps (6, 7,8 below) that I need
> help with..

The installation step for the snapshot tarball is identical with the
released version.  If you installed already alsa-driver tarball, do it
just in the same way.

If you haven't done it yet, just do the following four steps:

	% ./configure --with-debug=full --enable-dynamic-minors
	% make
	% su
	# make install-modules


Takashi


> 6 - i already have /dev/snd with some stuff in it... so, I won't run this
> step..
> 7 - edit it to do what?
> 8 - I dont know the name of my card..
> 
> 6) Run the './snddevices' script to create new sound devices in /dev
> directory.
>    Skip this step, if you have already /dev/snd/* files, or if you're
>    using a DEVFS or udev.
> 
> 7) Edit your kernel module config (either /etc/modprobe.conf or
>    /etc/modules.conf, depending on the kernel version). If you are not
>    sure, what to do, you may try the alsaconf script available in
>    the alsa-utils package.
> 
> 8) Run 'modprobe snd-xxxx' where xxxx is the name of your card.
>    Note: All ALSA ISA drivers support ISA PnP natively, so you don't need
>          isapnptools any more.  Don't use both together.  It will
>          conflict.  For disabling the ALSA ISA PnP support, specify
>          --with-isapnp=no configure switch.
> 
> On Mon, Feb 2, 2009 at 11:28 AM, Takashi Iwai <tiwai@suse.de> wrote:
> 
>     At Mon, 2 Feb 2009 11:26:25 -0500,
>     Tim Barnette wrote:
>     >
>     > Thanks, Takashi.  I tried installing the latest snapshot but wound up
>     > recompiling a bunch of stuff (which my box is not configured for)... Is
>     there
>     > an easy way to download and install the latest snapshot?
>    
>       ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
>     alsa-driver-snapshot.tar.gz
>    
>     > Is there a way to fix the 0x0d widget?  BIOS flash?  laptop seems kind
>     of new
>     > for that...
>    
>     Try the hda-verb command first to check whether it's really an issue
>     of 0x0d.
> 
>     Takashi
>    
>     >
>     > On Mon, Feb 2, 2009 at 10:25 AM, Takashi Iwai <tiwai@suse.de> wrote:
>     >
>     >     At Mon, 2 Feb 2009 10:17:03 -0500,
>     >     Tim Barnette wrote:
>     >     >
>     >     > Thanks, Takashi. I made this change and rebooted.
>     >     >
>     >     > I noticed right away the mute light is no longer on... but still
>     no
>     >     sound
>     >     > through speakers, only headphones..
>     >     >
>     >     > /sys/module/snd_hda_intel/parameters/model
>     >     > contains
>     >     > hp-dv5,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
>     >     >
>     >     > attached is the alsa-info.txt you requested..
>     >
>     >     Did you try the latest alsa-driver snapshot?
>     >
>     >     If it still doesn't work, I guess this is a BIOS problem.
>     >     The other HP dv laptops show the widget 0x0d as the speaker while
>     >     yours is unused.
>     >
>     >     Try to run:
>     >            hda-verb /dev/snd/hwC0D0 0x0d SET_PIN_WID 0x40
>     >
>     >     Takashi
>     >
>     >
> 
>