Re: ENS1371 joystick problem, bug in driver?

[Takashi Iwai <tiwai@suse.de>]

At Mon, 13 Oct 2003 14:28:04 +0200 (METDST),
Clemens Ladisch wrote:
> 
> Juan Linietsky wrote:
> > I cant seem to get the joystick port to run under this card (Ensoniq 1371)
> > under alsa 0.9.rc6.
> 
> You might have better luck with 0.9.7c.
> 
> > state.AudioPCI {
> >         control.1 {
> >                 comment.access 'read write'
> >                 comment.type BOOLEAN
> >                 iface CARD
> >                 name 'Joystick Enable'
> >                 value true
> >         }
> >         control.2 {
> >                 comment.access 'read write'
> >                 comment.type ENUMERATED
> >                 comment.item.0 'port 0x200'
> >                 comment.item.1 'port 0x208'
> >                 comment.item.2 'port 0x210'
> >                 iface CARD
> >                 name 'Joystick Address'
> >                 value 'port 0x200'
> >         }
> >
> > I tried using all the values above, but nothing works, and higher values are
> > ignored (error is reported).
> 
> The driver cannot change the gameport's port address while it's
> enabled, so you have to disable the joystick, then change the port,
> then enable it again.

i'm working on taking the joystick stuffs back to the module
parameters again.  will be finished in a couple of days.
keep tuned.


Takashi


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php