From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: patch, and other via82xx (VT8235) capture problems Date: Fri, 24 Oct 2003 15:14:44 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20031023044843.GA19701@bliss> <20031024010502.GA22833@bliss> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20031024010502.GA22833@bliss> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Zinx Verituse Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Thu, 23 Oct 2003 20:05:02 -0500, Zinx Verituse wrote: > > On Thu, Oct 23, 2003 at 06:47:35PM +0200, Takashi Iwai wrote: > > > > thanks for the patch. now applied to cvs. > > > > > Are the specs for the VT8235 available anywhere? > > > > not in public i know of... > > > > Ah, too bad. > > > Takashi > > Any ideas on the problem with me not being able to record > if the Input Source is set to Mic? > > arecord records when it's set to Line (as it was forced, before), > and does playback as well.. > > When it's set to Mic, I get no playback from a Mic (and I'm not > wanting to hook up powered output in to the jack when it's set > to Mic), but I suspect it's still Line-in, and the register > being twiddled isn't right, or needs some more setup. > > arecord waits a bit, then gives the error I mentioned: > arecord: pcm_read:1110: read error: Input/output error > > dmesg says nothing :/ > > If nothing else, the settings do have to do with the actual > capture sources (idx 0 vs. idx 1), because when I set idx 0 > to mic, it can't record, but idx 1 can, and when I set idx 1 > to mic, it can't record, but idx 0 can. When both are set > to mic, neither can record. sorry, could you elaborate this? i'm confused. did you try hw:0,0 and hw:0,1, right? Takashi ------------------------------------------------------- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/