From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: snd-opti92x-ad1848 Date: Fri, 17 Oct 2003 13:17:54 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <3F8D1C5A.4A1FDD11@srr.ro> <3F8D29F7.77623812@srr.ro> <3F8E3F22.1C9A8096@srr.ro> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <3F8E3F22.1C9A8096@srr.ro> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Andrei Boros Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Thu, 16 Oct 2003 09:48:02 +0300, Andrei Boros wrote: > > > > unload all ALSA (and isapnp, pnp) modules before the following. > > > > it must be the old isapnp module which wasn't unloaded. > > > I checked that no sound related modules are loaded. > I removed snd*.o from the /lib/modules... > I did make install, depmod -a > > My /etc/modules.conf reads : > alias char-major-116 snd > options snd cards_limit=2 > alias snd-card-0 snd-cs46xx > alias snd-card-1 snd-opti92x-ad1848 > options snd-opti-92x-ad1848 index=1 isapnp=1 id="Opti924" port=0x220 > irq=5 dma1=0 fm_port=0x388 mpu_port=0x300 mpu_irq=7 > > (i also have a hercules fortissimo 2, the cs46xx which works fine) > > So now I am sure no sound related modules are loaded. > modprobe snd-opti92x-ad1848 says > /lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: unresolved symbol > isapnp_resource_change_R09b965af > snd: Device or resource busy > > I see that snd-isapnp is not loaded > > Again, I unload _all_ modules. > I do modprobe snd-isapnp by hand > dmesg > > isapnp: Card 'OPTi Audio 16' > isapnp: 1 Plug & Play card detected total > > below is the contents of /proc/isapnp > > gate:~# modprobe snd-opti92x-ad1848 > /lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: init_module: Device or > resource busy > snd: Device or resource busy > > I take a look at the /proc/isapnp and I see that the device did not get > enabled the devices are activated by the alsa driver. so it's ok. the problem is that the detection of device failed by some reason. Takashi ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php