From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: ice1712 - [multiple PCM devices, signal levels? Date: Mon, 10 Feb 2003 10:24:18 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20030208230114.0cc100cf.rpav@nwlink.com> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20030208230114.0cc100cf.rpav@nwlink.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Ryan Pavlik Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Sat, 8 Feb 2003 23:01:14 -0800, Ryan Pavlik wrote: > > It seems like the ice1712 driver is fairly robust and has gone through > quite some development. However, I'm a bit confused as to why there is > only one PCM device. I have an MAudio Delta 44 card, and there are 4 > DACs and ADCs. Why aren't there at least 2 PCM devices for output? because the hardware access _always_ 10 channels. the channels are never independent. > Actually, being able to give an option for 2 stereo or 4 mono PCM > devices would be neat... would be possible via alsa-lib's share plugin... > Also, there's a "Variable Signal Level" control > to switch each input between +4dB, -4dB, and -10dB... is it possible to > access this? (One of my sound sources is a -10dB source.) aren't they in the "Analog Volume" section? ciao, Takashi ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com