All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: TJ <systemloc@earthlink.net>
Cc: linux-raid@vger.kernel.org, perex@suse.cz
Subject: Re: via82xx driver: reporting dxs_support experience
Date: Tue, 19 Apr 2005 11:13:09 +0200	[thread overview]
Message-ID: <s5hbr8bceoq.wl@alsa2.suse.de> (raw)
In-Reply-To: <200504171251.03980.systemloc@earthlink.net>

At Sun, 17 Apr 2005 12:51:03 -0400,
TJ wrote:
> 
> I was using the 2.6.7 kernel without APIC or ACPI support, and the via82xx 
> driver worked perfectly, compiled as a module, without any options. I built a 
> new 2.6.7 kernel on the same hardware with APIC and ACPI support in the 
> kernel, as the board supports it, and the driver did not work correctly. When 
> sound was played, a short, 1 second long bit of the sound to be played was 
> looped. Possibly this is the clicking noise described by some people? The 
> driver works fine with this new kernel after adding the option 
> "dxs_support=1". I hope this interaction with ACPI and APIC sheds some light 
> on some of the troubles with this driver. I can provide more information if 
> anyone wants it. Please CC me, I'm not on the list.

Please try dxs_support=4 and check a non-48kHz sample (e.g. normal MP3
playback).  Usually, dxs_support=4 is the "right" value for most
devices.  dxs_support=1 might work on old hardwares, though.


thanks,

Takashi
> 
> TJ
> 
> Motherboard: MSI K7T266 Pro2
> 
> lspci -nv:
> 
> 00:00.0 Class 0600: 1106:3099
>         Subsystem: 1106:0000
>         Flags: bus master, medium devsel, latency 0
>         Memory at e0000000 (32-bit, prefetchable) [size=64M]
>         Capabilities: [a0] AGP version 2.0
>         Capabilities: [c0] Power Management version 2
> 
> 00:01.0 Class 0604: 1106:b099
>         Flags: bus master, 66Mhz, medium devsel, latency 0
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>         Memory behind bridge: dfc00000-dfcfffff
>         Prefetchable memory behind bridge: dfa00000-dfafffff
>         Capabilities: [80] Power Management version 2
> 
> 00:06.0 Class 0200: 8086:100e (rev 02)
>         Subsystem: 8086:002e
>         Flags: bus master, 66Mhz, medium devsel, latency 96, IRQ 17
>         Memory at dffc0000 (32-bit, non-prefetchable) [size=128K]
>         Memory at dffa0000 (32-bit, non-prefetchable) [size=128K]
>         I/O ports at d800 [size=64]
>         Expansion ROM at dff80000 [disabled] [size=128K]
>         Capabilities: [dc] Power Management version 2
>         Capabilities: [e4] PCI-X non-bridge device.
>         Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 
> Enable
> -
> 
> 00:07.0 Class 0200: 1317:0985 (rev 11)
>         Subsystem: 1317:0570
>         Flags: bus master, medium devsel, latency 96, IRQ 18
>         I/O ports at d400 [size=256]
>         Memory at dfffbc00 (32-bit, non-prefetchable) [size=1K]
>         Expansion ROM at dff60000 [disabled] [size=128K]
>         Capabilities: [c0] Power Management version 2
> 
> 00:08.0 Class 0180: 105a:4d69 (rev 02) (prog-if 85)
>         Subsystem: 105a:4d68
>         Flags: bus master, 66Mhz, slow devsel, latency 96, IRQ 19
>         I/O ports at ec00 [size=8]
>         I/O ports at e800 [size=4]
>         I/O ports at e400 [size=8]
>         I/O ports at e000 [size=4]
>         I/O ports at dc00 [size=16]
>         Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]
>         Expansion ROM at dffe0000 [disabled] [size=16K]
>         Capabilities: [60] Power Management version 1
> 
> 00:09.0 Class 0180: 1095:0680 (rev 01)
>         Subsystem: 1095:0680
>         Flags: bus master, medium devsel, latency 96, IRQ 16
>         I/O ports at d000 [size=8]
>         I/O ports at cc00 [size=4]
>         I/O ports at c800 [size=8]
>         I/O ports at c400 [size=4]
>         I/O ports at c000 [size=16]
>         Memory at dfffbb00 (32-bit, non-prefetchable) [size=256]
>         Expansion ROM at dfe80000 [disabled] [size=512K]
>         Capabilities: [60] Power Management version 2
> 
> 00:11.0 Class 0601: 1106:3074
>         Subsystem: 1106:0000
>         Flags: bus master, stepping, medium devsel, latency 0
>         Capabilities: [c0] Power Management version 2
> 
> 00:11.1 Class 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
>         Subsystem: 1106:0571
>         Flags: bus master, medium devsel, latency 32
>         I/O ports at fc00 [size=16]
>         Capabilities: [c0] Power Management version 2
> 
> 00:11.5 Class 0401: 1106:3059 (rev 10)
>         Subsystem: 4005:4710
>         Flags: medium devsel, IRQ 28
>         I/O ports at bc00 [size=256]
>         Capabilities: [c0] Power Management version 2
> 

  parent reply	other threads:[~2005-04-19  9:13 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-17 16:51 via82xx driver: reporting dxs_support experience TJ
2005-04-17 16:55 ` TJ
2005-04-19  9:13 ` Takashi Iwai [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-04-17 16:53 TJ
2005-04-17 17:53 ` Sergey Vlasov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hbr8bceoq.wl@alsa2.suse.de \
    --to=tiwai@suse.de \
    --cc=linux-raid@vger.kernel.org \
    --cc=perex@suse.cz \
    --cc=systemloc@earthlink.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.