From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Trident problems. Date: Wed, 17 Sep 2003 10:50:39 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20030828005741.162b0565.david@neongoat.com> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: David Parker Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Tue, 16 Sep 2003 23:08:16 -0000, David Parker wrote: > > Takashi Iwai said: > > > could you please try the attached patch? > > if it still doesn't solve the problem, try to increase the length of > > timeout in snd_trident_4d_dx_init(), e.g. > > > > end_time = jiffies + HZ * 2; > > > > it will wait for 2 seconds. > > try this with and without the patch. > > > > if the same problem happens, try to commend out the line > > "return -EIO;" in the same function, so that the probing proceeds even > > if the check fails. let's see whether the further ac97 probing > > works. > > > > if still fails... remove the warm reset part. > > Sorry for the slow reply... I tried the patch and it didn't work so I also > tried combining the above fixes with and without the patch. Still no luck :( didn't it work even if you ignore the error as mentioned above? then it means that ac97 is really not ready for use. i'm afraid something is broken. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf