Re: problems and questions with creative audixy

[Takashi Iwai <tiwai@suse.de>]

Hi,

At Thu, 07 Feb 2002 17:35:37 +0100 (MET),
Guenther Sohler wrote:
> 
> Hallo List,
> 
> I migrated to alsa now. I think its a quite good concept, but I think I have
> found some bugs
> 
> When I play a midi file to the audixy wavetable synth, and there is a
> instrument like a cello which sounds till you switch it off, and you interupt
> with CTRL-C it stays hanging. its done with the midi port but
> the the port to the audixy synth should do a  "all note off" when it is beeing
> closed
 
It happend on emu10k1, too.  I'll try to find the bug.

> With my audixy all the 4 wavetable ports are fine but the midi ports do not work
> If I try to access them, there is following error message issued:
> alsa ../../alsa-kernel/pci/emu10k1/emumpu401.c:126 cmd 0xff failed at
> 0xd400(status=0xff, data=0xff)
> 
> the same command is repeated with 0x3f isntead of 0xff after 126
 
Aggh, I find one here.  Will be fixed soon.  Thanks.


> There are nice external-midi devices in /dev/snd where you can put raw midi
> data to, but there are no devices which go to the wavetable synth of the audixy
> 
> 
> Where can i find a description on all the snd midi modules especially not the
> pci and the isa but the general ones. snd-virmidi is just an example of a
> module i dont know its meaning at all.

A brief description is found in alsa-kernel/drivers/virmidi.c.
It'd be better to put this info into doc directory..


Takashi

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel