From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Fix for dell inspiron 8100 maestro3 Date: Fri, 16 May 2003 17:01:23 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <200305161632.46562.av@labcc.ch> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <200305161632.46562.av@labcc.ch> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Javier Conti Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi, At Fri, 16 May 2003 16:32:46 +0200, Javier Conti wrote: > > [1 ] > Hi, after a long and painful investigation on the maestro3 vs. irda problem on > the dell inspiron 8100 notebook, I found the FIXME tag in the maestro3 > sources and, inspired by the 8000 fix right above, I applied the same fix for > 8100. > > I'm no develper, but I think this should't break anything, and for me fixed > the problem on my 8100. Maybe someone will find this useful. > > Patch attached, bye, Javier are you sure that the patch is correct? your patch adds the same vendor an device id with the existing inspiron 8000 (1028:00a4). Takashi > -- > Javier Conti - Labcc > http://www.labcc.ch/ > [2 maestro3.patch ] > --- maestro3.c 2003-04-23 12:06:36.000000000 +0200 > +++ /usr/src/modules/alsa-driver/alsa-kernel/pci/maestro3.c 2003-05-14 17:19:35.000000000 +0200 > @@ -949,6 +949,13 @@ > }, > /* FIXME: Inspiron 8100 id should probably be here, too > * (8200 irrelevant: has intel8x0 with CS4205) */ > + { > + .name = "Dell Inspiron 8100", > + .vendor = 0x1028, > + .device = 0x00a4, > + .amp_gpio = -1, > + .irda_workaround = 1, > + }, > /* NEC LM800J/7 */ > { > .name = "NEC LM800J/7", ------------------------------------------------------- Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara The only event dedicated to issues related to Linux enterprise solutions www.enterpriselinuxforum.com