From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: asoundrc problem Date: Tue, 04 Feb 2003 13:30:07 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Oliver Schrempf Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Mon, 3 Feb 2003 14:40:26 +0100 (CET), Oliver Schrempf wrote: > > > it's the expected behavior, because the hardware doesn't support this > > format. it suppors only S32_LE. > > OK, I understand this, but when I use > % arecord -Dhw:0,0 -fS32_LE -r48000 foo.wav > I get > arecord: set_params:792: Channels count non available > > Is this expected, too? yes. the number of channels must be 10 for your card. > > but it seems that this is an alsa-lib bug although i can play > > 4-channel wav file using two consumer cards... > Hmm? Can I help here? I'm no expert in alsa-lib, but I can test on my > hardware. Let me know if you need something. well, this might be because you specfied 8 channels instead of 10. the hardware supports only 10 channels natively. could you check whether 20 (10+10) channels work? Takashi ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com