From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: sblive line capture woes Date: Fri, 18 Oct 2002 21:52:59 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20021018211649.GA22671@depression.ath.cx> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Jaroslav Kysela Cc: Bob Ham , "alsa-devel @ lists. sourceforge. net" List-Id: alsa-devel@alsa-project.org At Fri, 18 Oct 2002 21:36:39 +0200 (CEST), Jaroslav wrote: > > On Fri, 18 Oct 2002, Bob Ham wrote: > > > On Fri, Oct 18, 2002 at 08:31:10PM +0200, Jaroslav Kysela wrote: > > > > > Thanks. I don't see the problem at first glance. Are you trying to capture > > > signal from LiveDrive line #1? > > > > No, from 'Line LineDrive',0 > > > > > Could you follow these steps? > > > > > > Please, turn everything off (volumes and mute controls). > > > > I ran the attached script, which appears to do the job. The amixer output > > is also attached. > > > > > And type > > > this command: > > > > > > amixer sset 'Line LiveDrive',0 capture 100 cap > > > > Didn't work :( > > > > > It should be sufficient. If not, it might be that we have some different > > > names for EMU10K1 inputs. Then could you try these commands > > > (simultaneously, if input works, try determine the right one)? > > > > > > amixer sset 'Line LiveDrive',1 capture 100 cap > > > amixer sset 'IEC958 TTL',0 capture 100 cap > > > amixer sset 'Zoom Video',0 capture 100 cap > > > amixer sset 'IEC958 Optical' capture 100 cap > > > amixer sset 'IEC958 Coaxial' capture 100 cap > > > amixer sset 'Line LiveDrive' capture 100 cap > > > > Didn't work either :( > > > > > AC'97 controls should be off. There's none connection between AC'97 > > > and these inputs. Good luck. > > > > I'll bear that in mind. > > > > By the way, and I've no idea if it has any bearing but my snd-emu10k1 > > options include snd_extin=0x3fc3 snd_extout=0x1fff. > > You may try: snd_extin=0x3fff and try set Zoom Video and IEC958 TTL > controls again to verify, if signal is not there. how about to give a model module parameter (preferably in string), such like options snd-emu10k1 model="5.1" and set the extin/out masks inside ? Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf