All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: alsa-devel@alsa-project.org, tim.gardner@canonical.com, "Tellman,
	Steven" <Steven.Tellman@idt.com>,
	Mario Limonciello <mario_limonciello@dell.com>
Subject: Re: [PATCH] hda: make a STAC_DELL_EQ option
Date: Mon, 03 Nov 2008 14:28:26 +0100	[thread overview]
Message-ID: <s5hk5bl7xc5.wl%tiwai@suse.de> (raw)
In-Reply-To: <490EFC0F.1030903@embeddedalley.com>

At Mon, 03 Nov 2008 08:26:39 -0500,
Matthew Ranostay wrote:
> 
> Takashi Iwai wrote:
> > At Mon, 03 Nov 2008 08:12:43 -0500,
> > Matthew Ranostay wrote:
> >> Add support for explicitly enabling the EQ distortion hack for
> >> systems without software biquad support.
> >>
> >> Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
> > 
> > Is it to be merged to 2.6.28, right?
> That be best if we are still in that time window.

Sure, such a trivial fix *must* go in.

> > How about the older kernels?  To be sent to stable@kernel as well?
> > 
> Yeah this would good as well. Should I forward it?

We can just 'Cc: stable@kernel.org' in the patch comment.
Then stable guys will pick it up automatically when committed to the
upstream.


thanks,

Takashi

> 
> > 
> > thanks,
> > 
> > Takashi
> > 
> >> ---
> >>
> >> diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c
> >> index c2f900f..2c0f37f 100644
> >> --- a/pci/hda/patch_sigmatel.c
> >> +++ b/pci/hda/patch_sigmatel.c
> >> @@ -70,6 +70,7 @@ enum {
> >>  enum {
> >>  	STAC_92HD73XX_REF,
> >>  	STAC_DELL_M6,
> >> +	STAC_DELL_EQ,
> >>  	STAC_92HD73XX_MODELS
> >>  };
> >>
> >> @@ -792,9 +793,7 @@ static struct hda_verb dell_eq_core_init[] = {
> >>  };
> >>
> >>  static struct hda_verb dell_m6_core_init[] = {
> >> -	/* set master volume to max value without distortion
> >> -	 * and direct control */
> >> -	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
> >> +	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
> >>  	/* setup audio connections */
> >>  	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
> >>  	{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
> >> @@ -1622,11 +1621,13 @@ static unsigned int dell_m6_pin_configs[13] = {
> >>  static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
> >>  	[STAC_92HD73XX_REF]	= ref92hd73xx_pin_configs,
> >>  	[STAC_DELL_M6]	= dell_m6_pin_configs,
> >> +	[STAC_DELL_EQ]	= dell_m6_pin_configs,
> >>  };
> >>
> >>  static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
> >>  	[STAC_92HD73XX_REF] = "ref",
> >>  	[STAC_DELL_M6] = "dell-m6",
> >> +	[STAC_DELL_EQ] = "dell-eq",
> >>  };
> >>
> >>  static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
> >> @@ -4274,12 +4275,17 @@ again:
> >>  			sizeof(stac92hd73xx_dmux));
> >>
> >>  	switch (spec->board_config) {
> >> -	case STAC_DELL_M6:
> >> +	case STAC_DELL_EQ:
> >>  		spec->init = dell_eq_core_init;
> >> +		/* fallthru */
> >> +	case STAC_DELL_M6:
> >>  		spec->num_smuxes = 0;
> >>  		spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
> >>  		spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
> >>  		spec->num_amps = 1;
> >> +
> >> +		if (!spec->init)
> >> +			spec->init = dell_m6_core_init;
> >>  		switch (codec->subsystem_id) {
> >>  		case 0x1028025e: /* Analog Mics */
> >>  		case 0x1028025f:
> >> @@ -4289,8 +4295,6 @@ again:
> >>  			break;
> >>  		case 0x10280271: /* Digital Mics */
> >>  		case 0x10280272:
> >> -			spec->init = dell_m6_core_init;
> >> -			/* fall-through */
> >>  		case 0x10280254:
> >>  		case 0x10280255:
> >>  			stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
> >>
> > 
> 

      reply	other threads:[~2008-11-03 13:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-03 13:12 [PATCH] hda: make a STAC_DELL_EQ option Matthew Ranostay
2008-11-03 13:17 ` Takashi Iwai
2008-11-03 13:26   ` Matthew Ranostay
2008-11-03 13:28     ` Takashi Iwai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hk5bl7xc5.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=Steven.Tellman@idt.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=mario_limonciello@dell.com \
    --cc=mranostay@embeddedalley.com \
    --cc=tim.gardner@canonical.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.