From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: PATCH] SPDIF out clock sync for via8235 / ALC650 Date: Mon, 03 Feb 2003 10:45:58 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <200212302130.gBULUVp24791@ann-arbor.fmfts.com> <200302021203.h12C32409925@ann-arbor.fmfts.com> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <200302021203.h12C32409925@ann-arbor.fmfts.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: jgotts@linuxsavvy.com Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Sun, 02 Feb 2003 07:03:02 -0500, jgotts@linuxsavvy.com wrote: > > In message <200212302130.gBULUVp24791@ann-arbor.fmfts.com>, jgotts@linuxsavvy.c > om writes: > > >I have produced a minimal patch based upon your work in CVS to get the SPDIF > >port going on A7V8X motherboards with 0.9.0rc6 until 0.9.0rc7 is released: > > I'm not sure what went wrong with 0.9.0rc7, but SPDIF output still doesn't > work with my chipset. The patch only had cosmetic changes in the 0.9.0rc7 > release, so something must have been broken between the CVS tree as of December > 30th and the 0.9.0rc7 release. on rc7, you don't need a patch. try to use "spdif" pcm for the spdif output. it uses the SDX3 channel as described in the data sheet. playing through the spdif-out on the multi-channel is still posstible, too. but you need to reset "IEC958 AC97-SPSA" to 0, which corresponds to the slot 3/4, while the slot 10/11 is used as default on via823x. ciao, Takashi ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com