From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: rc2 stereo problem with via8233 Date: Wed, 26 Jun 2002 18:59:11 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.3 - "Ushinoya") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: John Covici Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Tue, 25 Jun 2002 14:12:15 -0400, John Covici wrote: > > Hi. With kernel 2.4.18 if I use the rc2 drivers, the PCM does not > play the right channel, when I went back to rc1 it worked fine > without any changes to my asound.state file. The cd plays right > channel in rc2 and rc1. i guess you're using via8233 or 8233C, not 8233A, right? please check lspci. there are different chip models of via8233, and each of them is different a bit. actually, the code of via8233 driver was changed since rc1, to support via8233a chip. now it uses the multi-channel playback mode, which is available on all chips. does the problem happen on a stereo sample, or on a mono sample? could you check the difference of formats and channels? thanks, Takashi ------------------------------------------------------- This sf.net email is sponsored by: Jabber Inc. Don't miss the IM event of the season | Special offer for OSDN members! JabberConf 2002, Aug. 20-22, Keystone, CO http://www.jabberconf.com/osdn