From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: CVS, ALC655 ->Line-In to Surround not working Date: Mon, 17 Nov 2003 15:13:59 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <3FB76CBD.8020901@starhub.net.sg> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <3FB76CBD.8020901@starhub.net.sg> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: R Chan Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Sun, 16 Nov 2003 20:25:33 +0800, R Chan wrote: > > Hi, > > Upgraded to CVS to get ALC655 support on a KT600 motherboard and > VIA8233 south bridge. ac97 codec is identified as ALC655 rev 0. > > I have unmuted all the usual suspects (PCM, Master, LFE, Center > Surround, except the down mix controls) and I have unmuted > "Line-In As Surround" and "Mic As Center/LFE". try turn "on", suppose that these jacks are shared. > I also use the surround51 > device which > references device 1 (is this the 6-channel device?) yes. > Unfortunately I can't get any sound out of the surround or center/LFE > speakers. > When I try something like > > pcm.testrear { > type plug > slave { > pcm "hw:0,1" > rate 48000 > } > ttable.0.2 1 > ttable.1.3 1 > } > (I presume channels 2 and 3 are the rear speakers) you can turn on "Duplicate Front" switch instead. then the front signal is routed to the rear speakers on hardware. Takashi ------------------------------------------------------- This SF. Net email is sponsored by: GoToMyPC GoToMyPC is the fast, easy and secure way to access your computer from any Web browser or wireless device. Click here to Try it Free! https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl