From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: patch, and other via82xx (VT8235) capture problems Date: Mon, 27 Oct 2003 11:41:37 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20031023044843.GA19701@bliss> <20031024010502.GA22833@bliss> <20031024205918.GA29951@bliss> <20031025143159.GA1176@bliss> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20031025143159.GA1176@bliss> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Zinx Verituse Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Sat, 25 Oct 2003 09:31:59 -0500, Zinx Verituse wrote: > > On Fri, Oct 24, 2003 at 03:59:18PM -0500, Zinx Verituse wrote: > > On Fri, Oct 24, 2003 at 03:14:44PM +0200, Takashi Iwai wrote: > > > At Thu, 23 Oct 2003 20:05:02 -0500, > > > Zinx Verituse wrote: > > > > > > > > Any ideas on the problem with me not being able to record > > > > if the Input Source is set to Mic? > > > > > > > > arecord records when it's set to Line (as it was forced, before), > > > > and does playback as well.. > > > > > > > > When it's set to Mic, I get no playback from a Mic (and I'm not > > > > wanting to hook up powered output in to the jack when it's set > > > > to Mic), but I suspect it's still Line-in, and the register > > > > being twiddled isn't right, or needs some more setup. > > > > > > > > arecord waits a bit, then gives the error I mentioned: > > > > arecord: pcm_read:1110: read error: Input/output error > > > > > > > > dmesg says nothing :/ > > > > > > > > If nothing else, the settings do have to do with the actual > > > > capture sources (idx 0 vs. idx 1), because when I set idx 0 > > > > to mic, it can't record, but idx 1 can, and when I set idx 1 > > > > to mic, it can't record, but idx 0 can. When both are set > > > > to mic, neither can record. > > > > > > sorry, could you elaborate this? i'm confused. > > > did you try hw:0,0 and hw:0,1, right? > > > > > > > Yeah, hw:0,0 fails when Input Source idx 0 is set to Mic, > > and hw:0,1 fails when Input Source idx 1 is set to Mic. > > > > > > > > Takashi > > > > > > > I have more to report on this issue: > When I was recording with 'Line' selected as the 'Input Source', > 'Mic' was the selected recording device, and 'Line' was completely > silent. Also, I have noticed that if I'm playing something on > hw:0,0, then hw:0,1 fails like recording does. However, if I try > to play two things to hw:0,0, it works. And if I try to play > something to hw:0,1 while hw:0,0 is closed, it also works. well, playing hw:0,0 and hw:0,1 is different from capture. hw:0,0 is the multi-play device (DXS channels) while hw:0,1 is the multi-channel play device for 5.1 outputs. and you cannot access to both devices at the same time, anyway. Takashi ------------------------------------------------------- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/