From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: asoundrc problem Date: Fri, 31 Jan 2003 18:47:33 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Oliver Schrempf Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Thu, 30 Jan 2003 12:06:17 +0100 (CET), Oliver Schrempf wrote: > > On Thu, 30 Jan 2003, Takashi Iwai wrote: > > > At Thu, 30 Jan 2003 09:34:13 +0100 (CET), > > Oliver Schrempf wrote: > > > > > > Since my last mail where I sent my current settings I still have the > > > problem, that I recieve the following error message > > > > > > arecord: main:462: audio open error: No such file or directory > > > > what shows if you run "aplay -L" and "aplay -l" ? > > does pcm.multi appear there? > OK, the modules where not loaded :-( > (I'll kick the guy who touched my machine...) > > Now again: > /home/oliver>arecord -Dplug:multi -c 16 test.wav > Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Channels 16 > arecord: set_params:765: Broken configuration for this PCM: no > configurations available hmm.. does it work when you specify the format and rate? % arecord -Dplug:multi -c16 -fS16_LE -r48000 foo.wav (or -fS32_LE as a native format, then you don't need plug layer) also, try whether areocord (with -c 8) works on each card (hw:0 and hw:1). Takashi ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com