From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: ac3 problems with the latest VIA8233 driver Date: Tue, 14 Jan 2003 15:48:37 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20030114114856.GA29127@netppl.fi> <20030114134840.GA3065@netppl.fi> <20030114141137.GB3065@netppl.fi> <20030114142320.GC3065@netppl.fi> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20030114142320.GC3065@netppl.fi> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Pekka Pietikainen Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Tue, 14 Jan 2003 16:23:20 +0200, Pekka Pietikainen wrote: > > On Tue, Jan 14, 2003 at 03:16:47PM +0100, Takashi Iwai wrote: > > oops, sorry, use hw:0,0,3 instead. > Nothing comes out. Which might be the same problem as with ac3 output, > volume at 0 and no way to make it higher. ok, then try the attached patch and output hw:0,1. if anything comes out, then change device 0 -> 1 subdevice 3 -> 0 in the definition of VIA8233.pcm.iec958.0 in VIA8233.conf. also, check whether "IEC958 Output Switch" affects the behavior. thanks for testing. ciao, Takashi ------------------------------------------------------- This SF.NET email is sponsored by: FREE SSL Guide from Thawte are you planning your Web Server Security? Click here to get a FREE Thawte SSL guide and find the answers to all your SSL security issues. http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0026en