From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Opti 931: Med931 ver.2.0 Date: Wed, 07 Aug 2002 15:20:43 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20020807125219.FUAL12516.fep06-svc.mail.telepac.pt@127.0.0.1> <20020807125219.FUAL12516.fep06-svc.mail.telepac.pt@[127.0.0.1]> Mime-Version: 1.0 (generated by SEMI 1.14.3 - "Ushinoya") Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Return-path: Received: from Cantor.suse.de (ns.suse.de [213.95.15.193]) by alsa.alsa-project.org (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id PAA03163 for ; Wed, 7 Aug 2002 15:20:46 +0200 In-Reply-To: <20020807125219.FUAL12516.fep06-svc.mail.telepac.pt@[127.0.0.1]> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: hugo.ferreira@mail.telepac.pt Cc: alsa-devel@alsa-project.org, Massimo Piccioni List-Id: alsa-devel@alsa-project.org At Wed, 7 Aug 2002 13:52:19 +0100, hugo.ferreira@mail.telepac.pt wrote: >=20 > Hi, >=20 > 1. I am using kernel 2.4.8 (from Mandrake 8.1). In the ftp sight > I came across kernel patches. My question is do I have to apply these > patches? BTW, I only found patches for 2.4.7 and 2.4.9. Does this > mean 2.4.8 is not supported/tested or its ok.=20 no, as long as you compile alsa-driver externally from alsa-driver package, you don't have to apply a patch to the kernel. > 2. I also found in the patches section a patch for the Opti 931 > chip. It was submitted on the 2002-05-07 by Michael Corlett and > assigned Jaroslav Kysela. Its status is still open. Does this mean > it still has not been applied to cvs or is not included in rc2 of > ver. 0.9.0? A simpleton=EF=BF=BD question: how is the =EF=BF=BDtatus=EF= =BF=BDclassified? the patch was already in cvs. but i'm not sure whether it was already fixed on rc2. please try the cvs version. you'll need to update alsa-lib, too, if you use the cvs drivers. > On a more general note, could someone out there that has the Opti > 931 working give me a hand on this? Specifically I would like to > know if the driver=EF=BF=BD pnp detection was on or if the isapnp tools > where used. Please note that I have successfully bused the OSS > drivers and am using the same settings with the ALSA drivers to no > avail.=20 i could help for general fixes but such a hardware specific problem is difficult to handle without the card in hands... perhaps Massimo, the original author of opti9x drivers, can help better. (now cc'ed, too) Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf