From: Takashi Iwai <tiwai@suse.de>
To: David Henningsson <david.henningsson@canonical.com>
Cc: alsa-devel@alsa-project.org, 1227093@bugs.launchpad.net,
stable@vger.kernel.org
Subject: Re: [PATCH 2/2] ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model)
Date: Thu, 10 Oct 2013 13:18:17 +0200 [thread overview]
Message-ID: <s5hmwmh8jd2.wl%tiwai@suse.de> (raw)
In-Reply-To: <1381400364-6067-2-git-send-email-david.henningsson@canonical.com>
At Thu, 10 Oct 2013 12:19:24 +0200,
David Henningsson wrote:
>
> The external mic showed up with a precense detect of "always present",
> essentially disabling the internal mic. Therefore turn off presence
> detection for this pin.
>
> Note: The external mic seems not yet working, but an internal mic is
> certainly better than no mic at all.
>
> Cc: stable@vger.kernel.org
> BugLink: https://bugs.launchpad.net/bugs/1227093
> Signed-off-by: David Henningsson <david.henningsson@canonical.com>
> ---
> sound/pci/hda/patch_realtek.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> Note: when doing stable backports, the two lines ".chained = true" and
> ".chain_id = ALC269_FIXUP_HEADSET_MIC" can be dropped.
Then better to split the patch to two, one just for disabling the dead
ext mic pin, and another for adding the headset mic chain. The former
can go to stable while the latter goes to next together with the
previous ALC269_FIXUP_HEADSET_MIC patch.
If adding a new fixup entry for stable, put to somewhere in the middle
so that git cherry-pick would work. Appending to the tail is
problematic because of a few previous fixups aren't merged to stable,
thus the new entry cannot be applied cleanly.
thanks,
Takashi
>
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 8cb3350..ec47681 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -3556,6 +3556,7 @@ enum {
> ALC282_FIXUP_ASUS_TX300,
> ALC283_FIXUP_INT_MIC,
> ALC290_FIXUP_MONO_SPEAKERS,
> + ALC286_FIXUP_SONY_MIC_NO_PRESENCE,
> };
>
> static const struct hda_fixup alc269_fixups[] = {
> @@ -3844,6 +3845,15 @@ static const struct hda_fixup alc269_fixups[] = {
> .chained = true,
> .chain_id = ALC269_FIXUP_DELL3_MIC_NO_PRESENCE,
> },
> + [ALC286_FIXUP_SONY_MIC_NO_PRESENCE] = {
> + .type = HDA_FIXUP_PINS,
> + .v.pins = (const struct hda_pintbl[]) {
> + { 0x18, 0x01a1913c }, /* use as headset mic, without its own jack detect */
> + { }
> + },
> + .chained = true,
> + .chain_id = ALC269_FIXUP_HEADSET_MIC,
> + },
> };
>
> static const struct snd_pci_quirk alc269_fixup_tbl[] = {
> @@ -3908,6 +3918,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
> SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
> SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
> SND_PCI_QUIRK(0x1043, 0x8516, "ASUS X101CH", ALC269_FIXUP_ASUS_X101),
> + SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
> SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2),
> SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
> SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2013-10-10 11:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-10 10:19 [PATCH 1/2] ALSA: hda - Add a headset mic model for ALC269 and friends David Henningsson
2013-10-10 10:19 ` [PATCH 2/2] ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model) David Henningsson
2013-10-10 11:18 ` Takashi Iwai [this message]
2013-10-10 13:26 ` David Henningsson
2013-10-10 13:30 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2013-12-25 9:55 Hendrik-Jan Heins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hmwmh8jd2.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=1227093@bugs.launchpad.net \
--cc=alsa-devel@alsa-project.org \
--cc=david.henningsson@canonical.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.