From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Re: [PATCH][2/2] hda: add sigmatel codec support Date: Wed, 13 Apr 2005 16:28:20 +0200 Message-ID: References: <20050413003805.E24624@cox.net> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20050413004951.F24624@cox.net> Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Matt Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Wed, 13 Apr 2005 00:49:52 -0700, Matt wrote: > > Add initial SigmaTel codec support for 9200 and 922x. Note that > this hda patch relies on the configuration default registers to > be set correctly (normally by BIOS/firmware) in order for it to > set up pin widgets properly. There's a test switch in the patch > so it will work with the SigmaTel reference boards that are usually > plugged into a system that doesn't set the configuration default > registers. It supports 2 channel analog out and line/mic in. I > plan to add >2 channel support and spdif support shortly. > Please apply. > > Signed-off-by: Matt Thanks, I applied both patches to CVS. Takashi ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click