From: Takashi Iwai <tiwai@suse.de>
To: Adrian Pardini <pardo.bsso@gmail.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH - usb: Headphone support for cm6206 1/2] usb: move snd_usb_cm106_write_int_reg to mixer_quirks.c
Date: Fri, 30 Jul 2010 14:24:45 +0200 [thread overview]
Message-ID: <s5hocdpp376.wl%tiwai@suse.de> (raw)
In-Reply-To: <201007201942.28942.pardo.bsso@gmail.com>
At Tue, 20 Jul 2010 19:42:28 -0300,
Adrian Pardini wrote:
>
> Hi all, this series of patches adds another control to cm6206 based cards to
> let the user select wich ouput the "Headphone" jack mirrors. Please review.
You can just remove "static" instead of moving the whole function,
right?
thanks,
Takashi
>
> Thanks.
>
> Signed-off-by: Adrian Pardini <adrian.pardini@solar.org.ar>
>
> diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
> index e7df1e5..c4cbbc0 100644
> --- a/sound/usb/mixer_quirks.c
> +++ b/sound/usb/mixer_quirks.c
> @@ -354,6 +354,22 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
> }
> }
>
> +/*
> + * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
> + * documented in the device's data sheet.
> + */
> +int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
> +{
> + u8 buf[4];
> + buf[0] = 0x20;
> + buf[1] = value & 0xff;
> + buf[2] = (value >> 8) & 0xff;
> + buf[3] = reg;
> + return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
> + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
> + 0, 0, &buf, 4, 1000);
> +}
> +
> int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
> {
> int err;
> diff --git a/sound/usb/mixer_quirks.h b/sound/usb/mixer_quirks.h
> index bdbfab0..bc5d577 100644
> --- a/sound/usb/mixer_quirks.h
> +++ b/sound/usb/mixer_quirks.h
> @@ -9,5 +9,7 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
> void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
> int unitid);
>
> +int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value);
> +
> #endif /* SND_USB_MIXER_QUIRKS_H */
>
> diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
> index 9a9da09..b8a5a18 100644
> --- a/sound/usb/quirks.c
> +++ b/sound/usb/quirks.c
> @@ -353,22 +353,6 @@ static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
> return 0;
> }
>
> -/*
> - * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
> - * documented in the device's data sheet.
> - */
> -static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
> -{
> - u8 buf[4];
> - buf[0] = 0x20;
> - buf[1] = value & 0xff;
> - buf[2] = (value >> 8) & 0xff;
> - buf[3] = reg;
> - return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
> - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
> - 0, 0, &buf, 4, 1000);
> -}
> -
> static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
> {
> /*
> --
> 1.5.4.3
>
>
>
> --
> Adrian.
> http://elesquinazotango.com.ar
> http://www.noalcodigodescioli.blogspot.com/
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
next prev parent reply other threads:[~2010-07-30 12:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-20 22:42 [PATCH - usb: Headphone support for cm6206 1/2] usb: move snd_usb_cm106_write_int_reg to mixer_quirks.c Adrian Pardini
2010-07-20 22:44 ` [PATCH - usb: Headphone support for cm6206 2/2] usb: adds headphone source and mute controls to cm6206 Adrian Pardini
2010-07-30 12:31 ` Takashi Iwai
2010-07-30 14:51 ` Adrian Pardini
2010-07-30 15:08 ` Takashi Iwai
2010-07-30 12:24 ` Takashi Iwai [this message]
2010-07-30 14:39 ` [PATCH - usb: Headphone support for cm6206 1/2] usb: move snd_usb_cm106_write_int_reg to mixer_quirks.c Adrian Pardini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hocdpp376.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=pardo.bsso@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.