From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: btw Date: Wed, 16 Oct 2002 12:15:20 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20021014191214.GB6704@undertone.org> <20021014192959.GA6792@undertone.org> <20021014193407.GA6821@undertone.org> <20021015175750.GA8918@undertone.org> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20021015175750.GA8918@undertone.org> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: mark@undertone.org Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Tue, 15 Oct 2002 12:57:50 -0500, mark@undertone.org wrote: > > [1 ] > On Tue, Oct 15, 2002 at 12:51:11PM +0200, Takashi Iwai wrote: > > At Mon, 14 Oct 2002 14:34:07 -0500, > > mark@undertone.org wrote: > > > > > > I have got to stop spamming, you -- sincere apologies. Mixer apps will > > > start up, but it wont actually let me change any settings. > > > > ok, could you show /etc/asound.state (suppose it works now :) > > it could be the mixer config problem. > > Included. Seems like I should be able to read/write to the > device. Incidentally, with the code as it stands now (im guessing > because of that define invoked for testing), the mixer exhibits the > same exact behavior for the cs4281 card in my laptop. I can't change > any settings. I mean I can try to, and it seems to go "through" but > nothing changes. IIRC, there was a bug in the recent changes. i think it's fixed now on cvs. please try to update the cvs tree again. > > > and, does aplay look as if working? > > i mean, the aplay starts and stops at the correct time length? > > please try to run "aplay -vv foo.wav". > > It seems to "play" when i shove a wav into either pcmC1D0p or > pcmC1D0c. do you mean "aplay -Dhw:1,0 foo.wav" and "arecord -Dhw:1,0 foo.wav" ? (please don't access to the ALSA device files directly.) > > also, please check the status shown in /proc/asound/card0/stream0 > > while running (playback or capture). > > Included is the contents of the stream file while doing > so. Doesn't seem to be too revealing. hmm, strangely, now you got only one playback, although there were more at the previous time. which usb control module are you using? for example, i found that the behavior of device is different between usb-uhci and uhci modules... ciao, Takashi ------------------------------------------------------- This sf.net email is sponsored by: viaVerio will pay you up to $1,000 for every account that you consolidate with us. http://ad.doubleclick.net/clk;4749864;7604308;v? http://www.viaverio.com/consolidator/osdn.cfm