From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Experimental USB audio support Date: Fri, 31 May 2002 11:38:53 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <3CF5B58B.59E5A233@boosthardware.com> <3CF74113.46D53687@boosthardware.com> Mime-Version: 1.0 (generated by SEMI 1.14.3 - "Ushinoya") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <3CF74113.46D53687@boosthardware.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Patrick Shirkey Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Fri, 31 May 2002 18:23:31 +0900, Patrick Shirkey wrote: > > Takashi Iwai wrote: > > > > > just run lsusb (as root) without options. then it will list all > > devices out. or, you can specify the vendor and device ids per -d > > option. please send me the output. > > > > > > I enventually managed to get it. here it is again. > > ----- > > Bus 001 Device 004: ID 0763:2001 Midiman > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.00 > bDeviceClass 0 Interface > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0763 Midiman > idProduct 0x2001 > bcdDevice 1.01 > iManufacturer 1 M Audio > iProduct 2 USB AudioSport Quattro (tm) > iSerial 0 > bNumConfigurations 1 > cannot get config descriptor 0, Connection timed out (110) hmm... that sounds bad... but the module is loaded successfuly? then the descriptor itself can be got inside the kernel. ok, i'll put a /proc interface to dump the obtained descriptor. a moment please... Takashi _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm