All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: PATCH] hda: Add STAC_DELL_M4_3 quirk
Date: Fri, 21 Nov 2008 08:43:08 +0100	[thread overview]
Message-ID: <s5hr655o777.wl%tiwai@suse.de> (raw)
In-Reply-To: <49261B37.8040700@embeddedalley.com>

At Thu, 20 Nov 2008 21:21:43 -0500,
Matthew Ranostay wrote:
> 
> Added STAC_DELL_M4_3 quirk for Dell systems, also reorganized the
> board config switch to assign number of digital muxes, microphones,
> and SPDIF muxes via the PCI quirk defined.
> 
> Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>

Applied now.

BTW, your embedded mail seems broken due to linebreaks.  At the next
time, check your MUA setting, or use an attachment if it's difficult
to fix.


thanks,

Takashi

> ---
> 
> diff --git a/Documentation/ALSA-Configuration.txt
> b/Documentation/ALSA-Configuration.txt
> index 3ab5fb1..8b99a22 100644
> --- a/Documentation/ALSA-Configuration.txt
> +++ b/Documentation/ALSA-Configuration.txt
> @@ -1076,6 +1076,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix.
> This was removed.
>  	  ref		Reference board
>  	  dell-m4-1	Dell desktops
>  	  dell-m4-2	Dell desktops
> +	  dell-m4-3	Dell desktops
> 
>  	STAC92HD73*
>  	  ref		Reference board
> diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c
> index e0298df..f1a0f13 100644
> --- a/pci/hda/patch_sigmatel.c
> +++ b/pci/hda/patch_sigmatel.c
> @@ -83,6 +83,7 @@ enum {
>  	STAC_92HD71BXX_REF,
>  	STAC_DELL_M4_1,
>  	STAC_DELL_M4_2,
> +	STAC_DELL_M4_3,
>  	STAC_HP_M4,
>  	STAC_92HD71BXX_MODELS
>  };
> @@ -1689,10 +1690,17 @@ static unsigned int dell_m4_2_pin_configs[11] = {
>  	0x40f000f0, 0x044413b0, 0x044413b0,
>  };
> 
> +static unsigned int dell_m4_3_pin_configs[11] = {
> +	0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
> +	0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
> +	0x40f000f0, 0x044413b0, 0x044413b0,
> +};
> +
>  static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
>  	[STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs,
>  	[STAC_DELL_M4_1]	= dell_m4_1_pin_configs,
>  	[STAC_DELL_M4_2]	= dell_m4_2_pin_configs,
> +	[STAC_DELL_M4_3]	= dell_m4_3_pin_configs,
>  	[STAC_HP_M4]		= NULL,
>  };
> 
> @@ -1700,6 +1708,7 @@ static const char
> *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
>  	[STAC_92HD71BXX_REF] = "ref",
>  	[STAC_DELL_M4_1] = "dell-m4-1",
>  	[STAC_DELL_M4_2] = "dell-m4-2",
> +	[STAC_DELL_M4_3] = "dell-m4-3",
>  	[STAC_HP_M4] = "hp-m4",
>  };
> 
> @@ -1731,6 +1740,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
>  				"unknown Dell", STAC_DELL_M4_2),
>  	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264,
>  				"unknown Dell", STAC_DELL_M4_2),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa,
> +				"unknown Dell", STAC_DELL_M4_3),
>  	{} /* terminator */
>  };
> 
> @@ -4650,14 +4661,21 @@ again:
> 
>  	switch (spec->board_config) {
>  	case STAC_HP_M4:
> -		spec->num_dmics = 0;
> -		spec->num_smuxes = 0;
> -		spec->num_dmuxes = 0;
> -
>  		/* enable internal microphone */
>  		stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
>  		stac92xx_auto_set_pinctl(codec, 0x0e,
>  			AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
> +		/* fallthru */
> +	case STAC_DELL_M4_2:
> +		spec->num_dmics = 0;
> +		spec->num_smuxes = 0;
> +		spec->num_dmuxes = 0;
> +		break;
> +	case STAC_DELL_M4_1:
> +	case STAC_DELL_M4_3:
> +		spec->num_dmics = 1;
> +		spec->num_smuxes = 0;
> +		spec->num_dmuxes = 0;
>  		break;
>  	default:
>  		spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
> 

      reply	other threads:[~2008-11-21  7:43 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-21  2:21 PATCH] hda: Add STAC_DELL_M4_3 quirk Matthew Ranostay
2008-11-21  7:43 ` Takashi Iwai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hr655o777.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=mranostay@embeddedalley.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.