Re: dxs_support detection or feature broken?

[Takashi Iwai <tiwai@suse.de>]

At Fri, 23 Jan 2004 23:40:18 -0500,
John Gotts wrote:
> 
> I have an ASUS A7V8X motherboard with a VIA VT8233 audio controller equipped
> with SPDIF.  I have a set of digital speakers and use the SPDIF out for
> everything possible.  (The speakers will fall back to analog if there is no
> digital signal present.)
> 
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
> 
> For a long time (through 1.0.0rc1) I had been using plug:spdif as my audio
> device and aplay had no problems playing 22,050 Hz WAV files:
> 
> aplay -D plug:spdif <filename>.wav
> 
> But with 1.0.1 my speakers started playing 22,050 Hz WAV files at 48,000 Hz.
> 
> After reading the following thread:
> 
> http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg10448.html
> 
> I added the following line to my /etc/modules.conf:
> 
> options snd-via82xx dxs_support=3
> 
> and plug:spdif is working again.  One message says "By default snd-via82xx uses
> dxs_support=3 (except for certain known motherboards)."  Either my motherboard
> should become unknown or this feature is not working correctly.

well, the dxs_support detection is correct.
the problem is that spdif doesn't support 22.5kHz but the via82xx
driver doesn't restrict the sample rates for spdif.
i guess 44.1khz sample can be played correctly even without "plug".

ok, this bug should be fixed in the future...

a workaround is to define your own pcm such as

pcm.myspdif {
	type plug
	slave {
		pcm "spdif"
		rate 48000
	}
}

and

	% apaly -Dmyspdif 22500hz.wav


Takashi


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn