From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: S/PDIF on AD1980 patch Date: Thu, 13 Feb 2003 12:40:28 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <1045135142.3e4b7f26649c8@webmail3.namezero.com> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <1045135142.3e4b7f26649c8@webmail3.namezero.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Jaroslaw Sobierski Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Thu, 13 Feb 2003 03:19:02 -0800, Jaroslaw Sobierski wrote: > > > Hi all, > > I recently installed an Asus P4PE with built in AD1980 audio codec > (accessible through the ICH4 south bridge). The latest ALSA drivers > detected the chip and AC97 audio correctly even setting up the > IEC958 controls. The problem is I still got no output on the external > S/PDIF module. > > I downloaded the specs from Analog Devices and found the register > responsible for this, modified the AC97 codec drivers to add a > control for the 3 flags specific to this chip (ie. outside of the ac97 > specification) concerning the digital interface and managed to turn > it on. > > I would like to submit this modification so that others who may have > a similar setup can use it. So my question is : what's next? Who can > merge such patches to the CVS tree and what is the validation and/or > testing procedure? Or do I just mail the code to 'perex' and he takes > care of it? just send the patch to alsa-devel ML. (or you can send to Jaroslav or me directly, too, if you don't show the patch publicly :) we'll review the patch and soon commit to cvs if it's ok. ciao, Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf