From: Takashi Iwai <tiwai@suse.de>
To: Anton Worshevsky <gbdj@linux.spb.org>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Re: VIA8233/8235 testers wanted
Date: Thu, 16 Jan 2003 10:21:42 +0100 [thread overview]
Message-ID: <s5hsmvt30wp.wl@alsa2.suse.de> (raw)
In-Reply-To: <1333.030115@linux.spb.org>
[-- Attachment #1: Type: text/plain, Size: 2028 bytes --]
Hi,
At Wed, 15 Jan 2003 00:48:46 +0300,
Anton Worshevsky wrote:
>
> Hello ,
>
> > if someone has VIA8233, VIA8233A, VIA8233C or VIA8235 chipset, could
> > you help the testing of the new driver?
> > the new driver code is found at
> >
> > http://www.alsa-project.org/~iwai/via82xx.c
>
> i has VIA8235 and ALC650 codec. After installing new driver from cvs from
> 20030113, there is following problem:
>
> In 5.1-channel dvd playback with xine using surround51 device,
> i has swapped Rear and Center/lfe channels.
> RL <-> Center, RR <-> LFE
> i fixed this with following patch for via82xx.c
>
> 812,813c812,815
> < case 5: slots = (1<<0) | (2<<4) | (5<<8) | (3<<12) | (4<<16); break;
> < case 6: slots = (1<<0) | (2<<4) | (5<<8) | (6<<12) | (3<<16) | (4<<20); break;
> ---
> > // case 5: slots = (1<<0) | (2<<4) | (5<<8) | (3<<12) | (4<<16); break;
> > // case 6: slots = (1<<0) | (2<<4) | (5<<8) | (6<<12) | (3<<16) | (4<<20); break;
> > case 5: slots = (1<<0) | (2<<4) | (3<<8) | (4<<12) | (5<<16); break;
> > case 6: slots = (1<<0) | (2<<4) | (3<<8) | (4<<12) | (5<<16) | (6<<20); break;
>
> please note that 5ch mode is untested.
> I'm not sure that it is alsa problem, xine' may be.
hmm, it could be due to the setting of ALC650. how is the status of
"Exchange Center/LFE" mixer switch?
> It will be nice to have a small prog for channel position testing in different
> playback modes, because now i know no 5.1ch source other then video player.
> In general multichannel playback has good quality now (with rc6 sound was
> cracking).
>
> > the new driver can (hopefully) play multiple streams simultaneously on
> > VIA8233, VIA8233C and VIA8235, but NOT on VIA8233A.
>
> It's worked, but second stream plays only left channel.
>
> Almost all OSS application such as games (UT, tux-racer and other) now producing
> cracking and skipping sound. Only XMMS OSS-plugin plays good. OSS-sound was good
> with rc6.
does the patch below change something?
ciao,
Takashi
[-- Attachment #2: via-frag-fix.dif --]
[-- Type: application/octet-stream, Size: 806 bytes --]
Index: alsa-kernel/pci/via82xx.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/via82xx.c,v
retrieving revision 1.17
diff -u -r1.17 via82xx.c
--- alsa-kernel/pci/via82xx.c 13 Jan 2003 09:07:53 -0000 1.17
+++ alsa-kernel/pci/via82xx.c 16 Jan 2003 09:19:57 -0000
@@ -773,7 +773,8 @@
outb(0 , VIAREG(chip, PLAYBACK_VOLUME_R));
outl((runtime->format == SNDRV_PCM_FORMAT_S16_LE ? VIA8233_REG_TYPE_16BIT : 0) | /* format */
(runtime->channels > 1 ? VIA8233_REG_TYPE_STEREO : 0) | /* stereo */
- (0xffff * runtime->rate)/(48000/16) | /* rate */
+ // (0xffff * runtime->rate)/(48000/16) | /* rate */
+ 0xfffff |
0xff000000, /* STOP index is never reached */
port + VIA_REG_OFFSET_STOP_IDX);
return 0;
prev parent reply other threads:[~2003-01-16 9:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-14 21:48 VIA8233/8235 testers wanted Anton Worshevsky
2003-01-16 9:21 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hsmvt30wp.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=gbdj@linux.spb.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.