All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Vincent Lejeune <vljn@ovi.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: ASUS Phoebus (CMI8888) HDA Support
Date: Mon, 04 Aug 2014 21:06:38 +0200	[thread overview]
Message-ID: <s5htx5s2hxd.wl%tiwai@suse.de> (raw)
In-Reply-To: <1407177031.13342.YahooMailNeo@web161506.mail.bf1.yahoo.com>

At Mon, 4 Aug 2014 11:30:31 -0700,
Vincent Lejeune wrote:
> 
> Thanks, it almost works now !
> 
> Actually it requires the AZX_DCAPS_NO_MSI (otherwise dma doesnt work) and AZX_DCAPS_POSFIX_LPIB (otherwise sound is stuttered) and no snoop.
> There is still an issue with the sound volume : it's very low, I have to put my speakers to 100% of their power to actually hear something. Otherwise sound is ok, no more crakling as with single_cmd mode.
> 
> Dmesg also complains about a db Mismatch, I suspect it's related to the issue. If I remove the patching ops in snd_hda_codec_build_controls the error goes away but there is no more sound and the digital output control disappear too. I dont know which patch is applied (cmedia ?).
> 
> 
> [    2.483128] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
> [    2.483238] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
> [    2.483282] snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
> [    2.483454] snd_hda_intel 0000:02:00.0: enabling device (0000 -> 0002)
> [    2.483494] snd_hda_intel 0000:02:00.0: Disabling MSI
> [    2.489701] snd_hda_intel 0000:01:00.1: no codecs initialized
> [    2.511016] sound hdaudioC1D1: autoconfig: line_outs=4 (0xc/0xe/0xd/0xf/0x0) type:line
> [    2.511018] sound hdaudioC1D1:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [    2.511019] sound hdaudioC1D1:    hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
> [    2.511020] sound hdaudioC1D1:    mono: mono_out=0x0
> [    2.511021] sound hdaudioC1D1:    dig-out=0x14/0x0
> [    2.511021] sound hdaudioC1D1:    inputs:
> [    2.511022] sound hdaudioC1D1:      Mic=0x12
> [    2.511023] sound hdaudioC1D1:      Line=0x15
> [    2.511024] sound hdaudioC1D1:      Aux=0x13
> [    2.523844] ALSA sound/pci/hda/hda_codec.c:2792 hda_codec: Mismatching dB step for vmaster slave (-100!=1000)

Could you give alsa-info.sh output with the patched kernel and option?
This should be rather the codec issue, and it's possibly a problem in
the generic parser.


Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2014-08-04 19:06 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-03 21:05 ASUS Phoebus (CMI8888) HDA Support Vincent Lejeune
2014-08-04 11:27 ` Takashi Iwai
2014-08-04 18:30   ` Vincent Lejeune
2014-08-04 18:35     ` Vincent Lejeune
2014-08-04 19:06     ` Takashi Iwai [this message]
     [not found]       ` <1407181440.71480.YahooMailNeo@web161503.mail.bf1.yahoo.com>
2014-08-05  7:13         ` Takashi Iwai
2014-08-05 22:26           ` Vincent Lejeune
2014-08-06  6:30             ` Takashi Iwai
2014-08-06 12:38               ` Takashi Iwai
2014-08-06 16:05                 ` Vincent Lejeune
2014-08-06 16:07                   ` Takashi Iwai
2014-08-06 17:07                     ` Vincent Lejeune
2014-08-07  8:01                       ` Takashi Iwai
2014-08-07 17:13                         ` Vincent Lejeune
  -- strict thread matches above, loose matches on Subject: below --
2014-08-03 21:11 Vincent Lejeune
2013-12-04 10:36 Geoffrey McRae
2013-12-04 10:53 ` Clemens Ladisch
2013-12-04 10:57   ` Geoffrey McRae
2013-12-04 11:57     ` Clemens Ladisch
2013-12-04 12:08       ` Geoffrey McRae
2013-12-04 12:18       ` Geoffrey McRae
2013-12-04 22:20       ` Geoffrey McRae
2013-12-04 22:36         ` Geoffrey McRae
2013-12-04 12:42     ` Geoffrey McRae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5htx5s2hxd.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=vljn@ovi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.