From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: emu10k1 (Audigy) LFE Date: Mon, 26 Aug 2002 15:00:10 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: emo_xine-mail@lycos.com Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Fri, 23 Aug 2002 15:00:09 +0100, Emilio Federici wrote: > > Hi everybody I'm writing here because I'd like to know how to redirect pcm output to the LFE. > The drivers and mixer settings are OK because XINE is capable of driving all 6 speakers perfectly during DVD playback; what I'd like is to have XMMS playing on 6 (5 is ok, don't care about center channel). > I've downloaded "Alsa 0.9 Xmms Output Plugin" that mirrors output for the front channels on the rear ones but still nothing from the LFE. > I'm not into alsa architecture enough to be able to modify the source code of this plugin (few lines) but if you like I can post it here so that someone more capable of me can do the job. you can route the output of pcm directly to surround and center/lfe. unmute and turn up "Wave Center" and "Wave LFE". a better way would be to add a new pcm definition to duplicate 6 channels. Takashi ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390