From: Takashi Iwai <tiwai@suse.de>
To: David Henningsson <david.henningsson@canonical.com>
Cc: 1549660@bugs.launchpad.net, alsa-devel@alsa-project.org
Subject: Re: [PATCH] ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225
Date: Thu, 25 Feb 2016 09:29:14 +0100 [thread overview]
Message-ID: <s5hvb5dyyzp.wl-tiwai@suse.de> (raw)
In-Reply-To: <1456388001-2640-1-git-send-email-david.henningsson@canonical.com>
On Thu, 25 Feb 2016 09:13:21 +0100,
David Henningsson wrote:
>
> On one of the machines we enable, we found that the actual speaker volume
> did not always correspond to the volume set in alsamixer. This patch
> fixes that problem.
>
> This patch was orginally written by Kailang @ Realtek, I've rebased it
> to fit sound git master.
>
> BugLink: https://bugs.launchpad.net/bugs/1549660
> Co-Authored-By: Kailang <kailang@realtek.com>
> Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This conflicts with the latest for-linus branch right after I applied
another fixup addition. Could you again rebase to for-linus branch?
Also, I guess it deserves Cc to stable?
thanks,
Takashi
> ---
> sound/pci/hda/patch_realtek.c | 23 +++++++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index efd4980..ab353b0 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -3801,6 +3801,10 @@ static void alc_headset_mode_mic_in(struct hda_codec *codec, hda_nid_t hp_pin,
>
> static void alc_headset_mode_default(struct hda_codec *codec)
> {
> + static struct coef_fw coef0225[] = {
> + UPDATE_COEF(0x45, 0x3f<<10, 0x34<<10),
> + {}
> + };
> static struct coef_fw coef0255[] = {
> WRITE_COEF(0x45, 0xc089),
> WRITE_COEF(0x45, 0xc489),
> @@ -3842,6 +3846,9 @@ static void alc_headset_mode_default(struct hda_codec *codec)
> };
>
> switch (codec->core.vendor_id) {
> + case 0x10ec0225:
> + alc_process_coef_fw(codec, coef0225);
> + break;
> case 0x10ec0255:
> case 0x10ec0256:
> alc_process_coef_fw(codec, coef0255);
> @@ -4749,6 +4756,7 @@ enum {
> ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE,
> ALC293_FIXUP_LENOVO_SPK_NOISE,
> ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY,
> + ALC225_FIXUP_DELL1_MIC_NO_PRESENCE,
> };
>
> static const struct hda_fixup alc269_fixups[] = {
> @@ -5368,6 +5376,17 @@ static const struct hda_fixup alc269_fixups[] = {
> .type = HDA_FIXUP_FUNC,
> .v.func = alc233_fixup_lenovo_line2_mic_hotkey,
> },
> + [ALC225_FIXUP_DELL1_MIC_NO_PRESENCE] = {
> + .type = HDA_FIXUP_VERBS,
> + .v.verbs = (const struct hda_verb[]) {
> + /* Disable pass-through path for FRONT 14h */
> + { 0x20, AC_VERB_SET_COEF_INDEX, 0x36 },
> + { 0x20, AC_VERB_SET_PROC_COEF, 0x57d7 },
> + {}
> + },
> + .chained = true,
> + .chain_id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE
> + },
> };
>
> static const struct snd_pci_quirk alc269_fixup_tbl[] = {
> @@ -5638,10 +5657,10 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
> {0x21, 0x03211020}
>
> static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = {
> - SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
> + SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE,
> ALC225_STANDARD_PINS,
> {0x14, 0x901701a0}),
> - SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
> + SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE,
> ALC225_STANDARD_PINS,
> {0x14, 0x901701b0}),
> SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE,
> --
> 1.9.1
>
next prev parent reply other threads:[~2016-02-25 8:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 8:13 [PATCH] ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225 David Henningsson
2016-02-25 8:29 ` Takashi Iwai [this message]
2016-02-25 8:39 ` David Henningsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hvb5dyyzp.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=1549660@bugs.launchpad.net \
--cc=alsa-devel@alsa-project.org \
--cc=david.henningsson@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.