From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: [PATCH]usbus428 0.1 against alsa-driver-0.9.6 Date: Mon, 08 Sep 2003 13:16:06 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <200309061636.50046.annabellesgarden@yahoo.de> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <200309061636.50046.annabellesgarden@yahoo.de> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Karsten Wiese Cc: Martin Langer , alsa-devel@lists.sourceforge.net, "'us428@drehmoment.org'" List-Id: alsa-devel@alsa-project.org At Sat, 6 Sep 2003 16:36:50 +0200, Karsten Wiese wrote: > > [1 ] > Hi, > > this uses hwdep 2 fold: > a) second stage firmware download > b) interface for us428control - aplication > > no alsa-mixer interface yet, sorry. > but: with us428control you can use the us428's sliders to set direct > monitoring levels and pcm-out level. > > I chose to integrate a userspace tool, so further needed steps for the us428's > knobs & sliders can be done in userspace until all is sorted out. > > see us428control & usX2Yloader in the following e-mails. thanks for the patch. now i commited it to cvs tree. i put us428 stuffs into alsa-driver/usb/us428 subtree to avoid spreading over a directory. also, usx2y.h is put alsa-driver/usb/us428, too. if it's necessarily exported, we can put it to alsa-kernel/include, later. the compilation seems ok. please check the cvs tree later. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf